cheapsk8 » user profile

1 1
Member Since 19/09/2009
Last Seen 07/03/2022
Location Perth

Recent Activities

I got a Prusa i3mk3 kit and it's been great. Over 10,000 hours of printing so far and pretty trouble-free. I've considered getting an Ender...
30/01/2022 - 21:53
I purchased one of these instead of a wheelbarrow and it's been pretty great so far. Can replace a movers dolly for a few tasks too.
20/01/2022 - 14:50
I always felt my back was better when I was lifting and I have more problems sitting around all the time with COVID lockdowns. Lifting...
14/01/2022 - 13:51
I'm not buying any torch unless it has Anduril. I'm so sick of random combos of modes that aren't fit for purpose and work differently on...
28/09/2021 - 23:48
After a few years mine did start marking the wall above the frame. It also sits too low (or is a pain to store). I replaced it with [one...
22/03/2021 - 16:31
Ali has 900x400x2mm for about $20 with a huge variety of printed designs....
16/02/2021 - 02:15
Like [this](https://www.aliexpress.com/item/1005001596048713.html) then? $6 for 6.
10/02/2021 - 14:12
Closing the umbrella canopy with the button doesn't retract the shaft. You have to load the system by pushing the handle back in manually.
09/02/2021 - 15:38
I would prefer solar heating to winter wookie!
22/11/2020 - 17:28
The fix for this is fewer people.
19/11/2020 - 12:44
It must be easier to get funding from businesses that may benefit from your work, rather than companies your work vilifies.
19/11/2020 - 12:42
[20oz much cheaper on Amazon](https://www.amazon.com.au/Estwing-E20C-Curved-Hammer-Leather/dp/B0000224VB)
25/08/2020 - 12:44
4ply is better value then: I'm quite comfortable using two squares of 4ply at a time. but I don't feel safe unless l use three of 3ply.
29/07/2020 - 12:01
Prism kites are fantastic. I have about seven of them.
05/05/2020 - 20:22
For making things that people buy? You're applying the right rating to the wrong end of the supply chain.
18/03/2020 - 22:22
It matters if the paper rips ever time you try to wrap something with sharp corners.
20/12/2019 - 00:21
I'm pretty sure the '7x 250mm Olympic' refers to the 7 pegs at 25cm in length for holding Olympic bar weights (each peg should hold 5...
06/11/2019 - 19:43
Are 20kg plates a standard diameter? Mine have handle holes and I don't know if they will fit on this if they are much bigger.
06/11/2019 - 18:37
Can you cancel an existing 3-month trial to become eligible or does the membership have to be expired?
10/10/2019 - 13:17
Or just use [Krita](https://krita.org/en/), which is free.
07/10/2019 - 22:47
This was great like 20 years ago in the arcade. Is the Xbox version really worth playing?
29/09/2019 - 19:39
Amazon cleared theirs yesterday for $15
04/09/2019 - 15:39
It's a markdown for their 'games clearance' that just isn't advertised anywhere...
04/09/2019 - 15:38
It's not the original Xiaomi umbrella. It's [something...
23/08/2019 - 12:49
I don't see the discount label on any Microsoft stuff (or I'd be all over an XB1). Big W was the only shop that had a decent price and is...
20/08/2019 - 23:52
Are Injinji any better than the $2-3 eBay/AliExpress equivalents?
08/08/2019 - 10:10
The Knipex 8701250 10-Inch Cobra Pliers are only [$42.65](https://www.amazon.com.au/gp/product/B000X4J2H0) (normal handle, not comfort...
21/07/2019 - 23:37
Shun are usually very expensive. Just go to IKEA and get a Vardagen cook knife and a paring knife for a total of $30 (or 365+ for $40)....
21/07/2019 - 13:36