tezza » user profile

1 2
Member Since 26/10/2009
Last Seen 59 min 6 sec
Location Sydney

Recent Activities

To be honest, I think most would provided 15-20ml of liquid and then just make up the rest with milk. Some stores may put a bit extra in...
24/01/2022 - 09:39
Got mine today too, a lot better than ordering with expected ETA shipping dates
18/01/2022 - 12:06
Probably a real narrow target market for this on here as you need a air line to run it
03/01/2022 - 19:00
May be promo combo because Aldi have their Ferrex brand on sale too
03/12/2021 - 17:25
Yes first five items and I believe the $1 applies until it’s automatically relisted (for good till cancelled listing)
28/11/2021 - 18:33
Do not by this bike, you will hate riding and give up on it. 1/10 on this bike.
08/11/2021 - 07:40
Only drops once it's sold because the promo only applies if a item sells.
03/11/2021 - 11:37
I think the Decathlon one which is a bit more is just as ordinary as this one. However you need to take in to account assembly, service...
28/10/2021 - 08:13
In my opinion for a average person who wants to ride around the local footpaths and with the kids, the bike is probably ok value at that...
28/10/2021 - 06:33
So has the mountain bike. Looks very ordinary. Specs arent very detailed however - unknown spec rear derailleur - generic front crank -...
25/10/2021 - 13:51
Just need to wait on the specs of the bike first. The ones which were sold over the past couple of years were fantastic value for what you...
23/10/2021 - 19:29
If you buy this, get extended warranty as well.
09/10/2021 - 19:40
The drill driver can be used to build furniture and small toys as it has torque settings on it. So you dial it down to the lowest torque...
09/10/2021 - 13:40
To be fair, the delay in shipping, especially out of Melbourne is really slow at the moment with lockdowns etc However the delay for the...
07/10/2021 - 09:44
Yep they would, anything 1/2" will fit it. For impact sockets, the most popular size is 1/2" anyhow. 3/4" is there for high torque tools...
06/10/2021 - 18:53
Much the muchness, the Skin is $80, Battery and charger (only 2.5ah battery) is $59 which leaves around $60 for a set of impact sockets.
06/10/2021 - 16:32
No, you need to get a hammer drill which will be able to drill through brick and take the hole saw attachments.
06/10/2021 - 16:29
That's disappointing, closer to the 27/7 would be more acceptable.
06/10/2021 - 13:51
For low torque applications, a standard socket would probably be ok, however there is a risk that the socket may shatter and cause you...
06/10/2021 - 08:33
For home use, a impact wrench is probably one of the last tools you would use. A drill / driver (with hammer function) is probably the most...
06/10/2021 - 08:30
It should as the torque on a wheel nut is normally done up to 70 - 80nm
06/10/2021 - 08:24
Just looking at the T&C's it says that the $30 gift card is provided within 10 days of paying the membership, so you need to pay the $49...
05/10/2021 - 14:03
LOL I ordered a delayed shipping too, however havent received anything just yet. I feel they have just been too overwhelmed with the orders
27/09/2021 - 14:04
Using the above as an example, a 3 year old Ranger with 150k on the odo will still be a desirable car
19/09/2021 - 19:28