ScreenMountsAu » user profile

3 2
Member Since 15/07/2019
Last Seen 13/01/2021
Location Sydney

Recent Activities

You need about 70mm underneath the desk for the clamp system. The other option is the grommet mount system that is included with each...
01/01/2021 - 16:10
Unlikely. The 38" would be on the desktop and not sure if the 27" could get above it. The height of the pole was the limiting factor and...
31/12/2020 - 20:39
Over and under monitors is not great for the neck. Side by side is way better for comfort. The H160 ends up being about 30-40mm taller as...
31/12/2020 - 20:36
Yes, all the H Series come with both Clamp and Grommet mounting options in the box.
31/12/2020 - 20:28
Have you checked your messages? We send it back on the Amazon message system within 24 hours, but if you don't check there you won't see it...
31/12/2020 - 20:27
You put the top two screws into the monitor part way, then hand the monitor on those two screws and insert the bottom two screws. Then...
31/12/2020 - 11:34
The VESA plate is upside down. I would suggest taking the monitor off, rotate the plate 180 degrees and re-install. Hope this helps.
31/12/2020 - 11:08
Only some of the sit/stand solutions, so not really appropriate. Sorry.
30/12/2020 - 23:30
You will need to go with the Dual Mount. Your OEM mount will be too tall for the H80 or H100 to go "over'.
30/12/2020 - 23:07
I would go with the H160 but you need to look carefully at the Overview Sheet for that product. It has shorter arms, so needs less space...
30/12/2020 - 22:45
Sorry, can't do with White. Really short supply and long backorders.
30/12/2020 - 22:38
Underneath you will need about 95mm clearance. You should also consider our LD-07E...
30/12/2020 - 22:29
Macs are hard as it depneds whether you have one with VESA mount or not. Some require additional adaptors to pick up the OEM stand mounts...
30/12/2020 - 22:20
VESA Mount plate for the H Series is 115 x 115. This should fit all monitors, recessed and not so recessed.
30/12/2020 - 22:17
None of these monitor VESA plates have central screw access for a camera mount - sorry.
30/12/2020 - 21:20
Wrong, no manufacturer rebate or support for this deal - it is all us for you.
30/12/2020 - 21:16
Done, but we are not going to announce it. 20% off and free Metro Shipping. Don't tell anyone....
30/12/2020 - 21:14
Yes the H160 and H180 can position a 27" monitor Over and Under. Check out the technical overview on the product page in the images.
30/12/2020 - 20:56
I have to leave this to those that know, but I think I have seen plenty of comments that even the F80 fits that screen. The H80 certainly...
30/12/2020 - 20:51
It takes a bit of explaining but essentially the current model F80 was made with a VESA plate that was wider at the top to make it easier...
30/12/2020 - 20:49
Again, definitely, for this monitor wait for the F45 to finally arrive back in stock in about one week. That is the mount you need for this...
30/12/2020 - 20:44
If you just want them side by side, the F195A in White is going to be the only option that works. If you need over and under, then none of...
30/12/2020 - 20:38
Definitely, for this monitor wait for the F45 to finally arrive back in stock in about one week. That is the mount you need for this huge...
30/12/2020 - 20:36
Just so you know, the F100A in White is on its way. Due in around the 10th of January.
30/12/2020 - 20:11
We have to dispatch product sold on eBay, so if we were going to do a sale on all of the H Series, we may as well do it on our own...
24/12/2020 - 12:17
Build is just the same. Price difference is from different materials and manufacturing process. Cheaper to make fabricated and powder...
24/12/2020 - 11:58
The top of the F80 VESA mounting plate is 120mm wide. The H80 is 115mm square. Some recessed VESA mounting points on monitors are big...
24/12/2020 - 11:55