joshau » user profile

The sauce comes in a sachet (at least according to the cooking instructions on the box).

This is an app for shooting video, not photos (like Halide). If I was shooting anything serious, I'd probably use this app for Video.

Can't speak for this specific model, but I have another 14" portable touch monitor that works fine using a USB-C to USB-C cable…

I have a Bellroy leather case on my iPhone 13 Pro, and it's worn terribly. The colour came out of it, and it went super patchy within a…

Because the form factor is really only designed for OEM. All of these are extracted from other devices (ie. old Surface Pro's, laptops…

Doesn't really matter if the NAND is trash-tier QLC, which is slow at the best of times.

I have a TCL835, and I would have to say it's probably the best TV you could buy under $1500. Nothing competes with it at this price point.

This is an annual plan, prepaid. There is no cancellation fee, as you've paid everything upfront already: https://i.imgur.com/jeCNhd0.png.…

I've picked up one of these the other day for $19, works a treat. https://www.aliexpress.com/item/1005005532212992.html

The main difference will be sustained writes. Samsung T7 has sustained writes around 300MB/s, whereas NV2 has sustained writes closer to…

I think you're getting negged because you fail to see the flawed logic in your argument. You're telling someone they should just flip the…

I've cooked the burgers before, and partially defrosted, they've never taken me more than 15-20 minutes in the air fryer. 45 minutes and…

The Toms Hardware review seems to be of a completely different variant of the drive, compared to the one listed in the description. Toms…

Dell will price match a competitors same specced machine, so if you'd prefer the Dell and it has the same specs as this deal, contact their…

Yep, 400 nits instead of 300.

The 2.8K 120Hz display upgrade is a bargain for $120 as well!

It's under tech specs, 1.3KG.

HFC has an upgrade path at least, DOCSIS 4.0 allows 10Gbps downstream speeds and 6Gbps upstream speeds. It's just a question of upgrading…

I would not recommend buying T-Power batteries. Their advertised specs are exaggerated at best, or a complete fabrication at worst. I have…

Vast majority of lead acid batteries sold today (like this one) are sealed. They don't need refilling as the electrolyte doesn't evaporate.

Some of the older MX500 drives had bad firmware that caused excessive wear on the NAND. If you have had it for three years, and haven't…

Won't be better tech, just more cost effective. Larger TLC NAND dies usually come with a performance hit, rather than gain, but they do…

They expect supply to return to pre-pandemic levels by Q2 2023: https://www.raspberrypi.com/news/supply-chain-update-its-good-news/

For bed levelling on the Ender 3 V1, the stock firmware _won’t_ apply the bed mesh at the start of the print automatically. You need to…

Pretty much, in terms of printing capability. Both seem to be full metal extruders, which is main requirement for printing filaments that…

The entire extruder assembly won't be drop in compatible, but assuming you don't completely blow it up, you can easily buy replacement…

Yea, man, that sounds like a decent deal! The CR Touch is a bit overpriced (can be had for $20 elsewhere), but the all Metal Extruder kit…

Keep in mind the Neptune 3 Pro is brand new, has very little public reviews, and is considerably less upgradable due to no using standard…

I understand where the price difference comes from, just personally from my experience, I wouldn't say that you are getting $250 worth of…

If parts availability is your main concern, I wouldn't worry too much. It may not seem like it, but 3D printers are quite simple machines,…