pscac001 » user profile

Member Since 08/10/2021
Last Seen 5 hours 23 min
Badges 1
Location Perth

Recent Activities

Methylated spirits is mostly ethanol with a little bit of poison added to make it undrinkable (by most people's standards). This stuff is…
25/09/2025 - 21:57
In case you're serious: definitely not. This is not ethanol (the type of alcohol found in drinks), it's isopropanol, it is NOT safe to…
25/09/2025 - 15:53
pscac001 was awarded a badge.
25/09/2025 - 15:53
So if I rent a house, and any of the past tenants have ever been with Leaptel, I'm not counted as new customer? That seems like it would…
14/09/2025 - 01:38
XLR just refers to the three pin plug on the bottom, if you are connecting over USB it's irrelevant. As a general rule condenser is…
27/08/2025 - 18:42
There is a special term for people who use "Fertility awareness" style birth control: Parents
21/08/2025 - 10:59
Wave Rock is pretty average IMHO, but if you're in the area definitely check out Mulka's Cave.
24/06/2025 - 15:40
I had heard similar things a few years back, I decided to take a chance on an Edge 40 and I've been reasonably happy with the updates.…
03/06/2025 - 11:59
"Mesh" has been used to mean different things at various times. At one point it referred to devices that would automatically configure…
02/06/2025 - 21:37
"Guys I'm totally serious about getting 300TB of storage! or maybe a budget 4 bay NAS"
31/05/2025 - 17:28
Yeah, there are definitely a few lucky ones out there, and I wouldn't be surprised if the odds are decently higher than the lotto. But as a…
28/05/2025 - 15:10
> You have a place to live. You *had* a place to live for those 30 years, but you don't get to keep it in the future unless you keep…
28/05/2025 - 13:56
This only holds if the bigger and better place hasn't had the same percentage growth. If smaller properties constantly grew in value at a…
28/05/2025 - 13:35
You are the best kind of correct.
20/05/2025 - 11:20
> a couple of hard drives. Just FYI, "fireproof" (for x mins and y temp) generally means that it won't reach the ignition point of paper.…
20/05/2025 - 11:15
If you want to go completely overboard, used dexion pallet racking shows up at auctions fairly regularly. I picked up a few meters of it…
20/05/2025 - 11:07
Can you provide a link to some examples? Last I heard a few fusion experiments had managed to get out slightly more energy (in the form of…
20/05/2025 - 10:48
Most of the ethernet plugs on the market are designed to attach to stranded cables, while the cabling that's installed in the walls is…
20/05/2025 - 09:58
Basically 4 and 5G don't have dedicated voice channels, you establish a data connection and send voice over it, the manufacturers had to…
12/05/2025 - 20:03
So it's exactly the same price as both of the big supermarket chains' home brand laundry powder? Why should people be using it?
11/05/2025 - 23:32
Twisted pair cabling, which is what the base-t standards use. "Ethernet cabling" could be anything from thicknet coax to single mode fibre.
10/05/2025 - 17:16
As opposed to what? You don't need to specify that a network interface on a consumer device is ethernet because there is zero chance it…
10/05/2025 - 17:13
Ethernet over RJ45 is base-t.
10/05/2025 - 13:45
The "60W" rating is mostly meaningless. It's meant to represent the power rating of an incandescent bulb that would put out a similar…
10/05/2025 - 13:39
> 3. All the ports are Ethernet. Do you mean base-t? I don't think anyone was expecting token ring or fibre channel on their NTD.
10/05/2025 - 13:28
How long are you looking to invest for? A high interest savings account will give modest returns with very low risk, but the returns will…
07/05/2025 - 14:42
It looks like not all of the stores have the 5-for-3 deal. The Jayo-3D store has it here: https://www.ebay.com.au/itm/404054737948 for…
07/05/2025 - 10:14
Slow delivery has certainly be an issue in the past, but for quite a while now most of my orders have arrived within a couple of weeks…
02/05/2025 - 11:33
For a business things like forced obsolescence and disabling third party slicer connections are probably not a major concern. Sending…
22/04/2025 - 22:04
I'm not exactly pushing the boundaries of speed or quality with an Ender 3, but I've found Siddament to be pretty decent. I used to use…
21/04/2025 - 01:13
Loading...