rhodges » user profile

Member Since 23/06/2011
Last Seen 25/03/2024
Location Brisbane

Recent Activities

In my experience manually cranked desks are so slow and tedious to raise and lower that most people can't be bothered in the end, which…
18/03/2024 - 08:50
@Averell these are more suited for working with wire (see OP). They wouldn't be the best as general purpose long nose pliers.
08/12/2023 - 12:01
Never a truer word spoken. My ten year old 9.8V Makita drill is still my favourite. For all the reasons you state and also because it can…
13/10/2023 - 00:35
I have the same. You can adjust the fan curves in the BIOS and it makes a huge difference. The default settings let it get too hot before…
23/08/2023 - 07:11
Still you'll be missing Home, End and Insert if you like to use those...
18/06/2023 - 19:58
I believe Cat6a comes in both shielded and unshielded flavours so if that's the defect it would still not affect you if you had UTP…
02/06/2023 - 23:54
I believe there was a particular firmware version for the U6 Pro after which Ubiquiti officially supported af. Somehow they reduced the…
02/06/2023 - 23:12
I have the Ozito, it works alright one handed, I use the other hand to stabilise/control the branch I'm cutting. The Ozito is pretty good…
03/05/2023 - 21:30
Oh and they also have an annoying way of becoming unresponsive for something like a whole minute or evem more after certain hardware…
12/03/2023 - 10:43
No, and pretty good to open up and replace it. Screws and very light clips, no need for any special tools to pry it open. We've had these…
12/03/2023 - 10:04
I'd be grateful if you could report what vintage they sent you? For some reason they seem to be cagey about it, while they aren't with most…
09/03/2023 - 23:40
The lack of a numpad is fine, but I don't think I could live without an End key.
04/02/2023 - 07:32
I have found with the cashback services they often track at a high rate and are quietly adjusted later before payout time. Don't trust that…
27/11/2020 - 19:43
Ah so the voucher code is not misleading. The post title "50% off Boozebud Deal" still is, and might be better to be re-worded.
30/11/2018 - 16:52
Wow, the coupon code name is outright misleading (as is the post title). The best you can do with the $5 voucher is get $45 off $100 -…
30/11/2018 - 16:41
*Not sure if it is Plat Bodge…. Plart Bog…. Platihtih Boje* Something like *plutt boy* I think. Not sure if Aus IKEA staff are trained…
03/07/2018 - 22:38
I think Myer isn't actually part of the Coles empire anymore - according to Wikipedia they divested it about 10 years ago.
03/03/2018 - 15:14
Thanks OP. Client side encryption but everything based on open standards. I like the sound of that.
25/11/2017 - 10:50
During the Groupon deal, CR was 7%,now it's 6.5. It's pretty much a wash as far as prices go, but I agree that it's a PITA to have to buy a…
21/11/2017 - 23:01
Downloaded and seems like a quality app.
23/09/2017 - 07:42
@knasty The previous owner did you a favour - ducted systems suck. You always pay for a lot more cooling than you need and the temperature…
02/03/2017 - 00:09
For the Queen size the description says it measures 210x210cm.
03/11/2016 - 23:30
Just a word of caution, the plain gal ones do have much sharper edges than the powder coated ones. Not as bad as the real cheapies but you…
07/10/2016 - 23:49
Yeah don't worry about that. What cheapacabra says is right, if you look closely as you go through the site will actually tell you this is…
15/09/2016 - 21:00
Thank you OP. After all the hurry-up-and-wait of air travel, another leg waiting for a shuttle to offsite parking is so good to avoid with…
15/09/2016 - 20:19
Great price (though not quite accurate because there is a $10 shipping surcharge for a half-case buy, so it's actually $21.32 per bottle…
30/08/2016 - 18:13
What about "up to 14.3% back in store credit when you spend over $70". Because that's the very best you can achieve. Of course you then…
29/08/2016 - 07:33
I don't imagine Sodastream will accept yours though, so this smells a bit of lock-in.
12/08/2016 - 16:28
You are in for a treat. I'm a long time fan of Uncut, including 2012, and the 2013 is altogether better than 2012 IMO.
26/07/2016 - 20:53
Loading...