masuta » user profile

Member Since 28/06/2011
Last Seen 13/08/2026
Badges 2
Location VIC

Recent Activities

Don’t use the Aldi dark. Medium is the one you want. You will obviously need to spend a bit of time to tweak your grinder settings, but…
29/05/2026 - 20:56
I'm not sure that this is the best match. It's a bifacial panel, so only 220w per side. If you can't get some light onto the back side then…
19/03/2026 - 07:39
Recent tear downs of the 100ah shows that they are now prismatic cells as well, so there should be no reason to avoid them now.
19/03/2026 - 07:30
This use to a great priced coffee when it was under $30 delivered. $45 for this is a hard pass from me. Use to buy all my beans from airjo,…
27/02/2026 - 15:33
They supply a blade and the STL to print the holder.
06/10/2025 - 22:14
I'm pretty sure everyone would prefer to deal with Anaconda rather than Kings for warranty. Kings warranty can be painful.
16/09/2025 - 08:39
The problem is that they have used cheap open air chucks. I cut them off and replaced them with 4 closed air chucks and it is now a great…
28/04/2025 - 23:04
It looks very similar to this one which is quoted as having a grill size of 26.5cm diameter so it will be tiny.…
19/02/2025 - 19:44
It's the only difference between the edge and the curv the different dock?
02/01/2025 - 23:17
Yep! I picked one up in store earlier today and used a $30 sms credit to bring the total down to $158.
26/12/2024 - 19:45
When I click the link it opens a webpage and asks me to download the app when the app is already installed. Any suggestions on how to get…
27/01/2024 - 14:00
I would rather buy 5 sets of the twinkly licensed lumations lights than one set of these.…
18/01/2024 - 10:28
I think about $1 a cup is about right. Airjo coffee is often ~$33/kg shipped. That's 60 cents for an 18g double shot. Let's say your milk…
30/10/2023 - 22:45
You obviously haven't tried to sous vide a whole leg of lamb? The water chamber of the multi cookers is very small and therefore very…
11/07/2023 - 11:30
The majority of the reviews of truphone look awful, how have you found them?
22/03/2023 - 23:09
You could look at an Ender 5 plus which will give you 350x350x400mm.
14/03/2023 - 08:09
How does sunlu compare with esun for pla?
07/03/2023 - 14:39
It's probably this group buy: https://www.ozbargain.com.au/node/736571
26/12/2022 - 15:41
I wish they had them in Melbourne as well! I have one set from last year and would like to get a second set as I agree that you probably…
24/12/2022 - 23:10
The fact that they are a string of 600 leds will mean that they have a Gen 2 controller as Gen 1 could not address that many leds.
22/12/2022 - 23:52
Geeetech Alkaid Resin Printer US$99 (~A$146.50) + Delivery @ Geeetech 3D Printers
I've wanted to try resin printing for a while. This is cheap enough for me to give it a go. Works out to ~$155 AUD and ~$11 shipping. It's…
22/12/2022 - 15:30
I noticed that briefly yesterday, but then it was removed from the website. I suspect it was a pricing error. Happy to stand corrected but…
21/12/2022 - 10:37
Thanks OP, picked up one in Melbourne.
21/12/2022 - 08:42
The Oracle is not really better than the dual boiler. It just has an average grinder built in. For the price of the Oracle you can buy the…
14/12/2022 - 19:15
The grinder is not an advantage. 3 second warm up... Sure the Thermo coil is hot enough but the rest of the machine will be stone cold.…
13/12/2022 - 23:12
If you like good coffee, the dual boiler hands down.
13/12/2022 - 22:46
There is a current OzBargain group buy that neology has organised. The 16tb EXOS is ~$17/tb through the group buy. That price is enough to…
19/11/2022 - 10:53
That should fit fine in any standard chuck, including this one.
18/11/2022 - 13:42
Loading...