Flyerone » user profile

Member Since 19/04/2012
Last Seen 18 hours 55 min
Badges 11 6
Location Sydney

Recent Activities

I want a thinkpad deal. I wish the Carbon X1's weren't so expensive, and had non soldered memory. Is a P14s the closest to a carbon X1 in…
25/06/2025 - 16:23
If I was printing an enclosure for this mahcine again I would print this version by Doug Joseph…
14/06/2025 - 21:52
5kg for pizza dough sometimes. I want to prove it for 24 hours at 17-18C per AVPN guidelines if possible. I normally do just do a 24 hour…
12/06/2025 - 18:20
Sure mate. Did you just google that? Or did someone on tiktok tell you?
12/06/2025 - 18:05
I'm thinking of using one of these as a dough prover. Is anyone here using one for that purpose?
12/06/2025 - 09:40
How is a stainless steel drinking vessel not dishwasher safe?
06/06/2025 - 08:15
What do we think about this [Silicon Power…
05/06/2025 - 18:52
Do these have a memory and provide a weekly/monthly power usage? I think the ones I have now only seem to tell me in real time what the…
02/06/2025 - 11:48
Is this stuff useful for FDM filament storage? Can it be dried out and reused?
27/05/2025 - 08:50
Yeah, my father just got this email. Looking for something decent which will still get decent consistency for southern coastal NSW
21/05/2025 - 10:10
There's a Redeem button right beside the picture of the item.
20/05/2025 - 07:16
Sony lists their "suggested retail" price normally.
19/05/2025 - 17:44
Camel says it's this price half the time. It doesn't give UHS-ii speeds and doesn't have a CF Express slot so it's okay but not great.
18/05/2025 - 09:25
Brooklyn and Long Island City were better places to stay for both price, views and atmosphere.
15/05/2025 - 12:16
Moto knew what they were doing making sure these fit airtag accessories. Well played Moto.
12/05/2025 - 15:08
>500-day Battery Life Hilarious.
12/05/2025 - 11:23
Check the Octoprint release page for hardware requirements. >Recommended hardware: Raspberry Pi 3B, 3B+, 4B or Zero 2
07/05/2025 - 18:46
No worries. A tip for you or anyone buying a printer for the first time, I would recommend having a way to dry your filament. Either a…
07/05/2025 - 16:50
I have no idea what z-height saving is. I think @initiateit might have been referring to z-offset which is the height above the print bed…
07/05/2025 - 16:33
>is that for power cut off and resume etc? No. >so the custom firmware not do this? Stock firmware does support power loss recovery.…
07/05/2025 - 14:09
Yes but you'd have to run it on something like a Pi Zero W.
07/05/2025 - 12:00
>If you use Orcaslicer you will need to do lots of tweaking unless you get lucky with a perfect machine. I wouldn't say it needed a lot of…
07/05/2025 - 11:57
> how do you find the usability and ease of use? I found it relatively easy, but how would one know how that translates to others? I found…
07/05/2025 - 11:52
I don't really understand your question. [is your answer here](https://github.com/DrA1ex/ff5m/blob/main/docs/PRINTING.md#z-offset)
07/05/2025 - 10:50
I think "nowhere near as good" is a rough call. You could have included "in my experience" to be fair. I've seen some cracking prints from…
07/05/2025 - 10:46
Well you get the stock FF screen but you also get Klipper. I'll just copy paste the features from the github page. * Stock Screen with…
07/05/2025 - 10:26
MAY20 code, right there in the post.
07/05/2025 - 10:09
Terrific printer. I'm very happy with mine. I did install the Forge-X firmware for added features even after telling myself I wouldn't…
07/05/2025 - 10:08
Loading...