• expired

Netcomm Dynalink RTA1046VW Wireless VOIP ADSL2+ Modem/Router - $174.99 + $14.95 delivery

22

Blurb from site:

NETCOMM DYNALINK RTA1046VW WIRELESS VOIP ADSL2+ MODEM/ROUTER

Broadband Internet Access up to 24 Mbps
Supports ADSL, ADSL2 and ADSL2+
Simple Configuration
Integrated 54 Mbps Wireless Access
Wireless Security, WEP and WPA
4 Ethernet Ports for Internet Sharing
Suitable for Home and Office Networks
Security Firewall & DMZ
VPN Passthrough
Port Forwarding, UPnP™ and QoS
Lifetime technical support
2 Phone ports and PSTN backup
The RTA1046VW is able to support Broadband Internet Access up to 24 Mbps, ADSL, ADSL2 and ADSL2+. With simple configuration it's a breeze to setup. Including integrated 54 Mbps Wireless Access with wireless Security, WEP and WPA and 4 Ethernet Ports for Internet Sharing.

The RTA1046VW is suitable for Home and Office Networks. Incorporated in the RTA1046VW is security firewall & DMZ, VPN Passthrough, Port Forwarding, UPnP™ and QoS and 2 Phone ports and PSTN backup.

PORTS: 1x RJ-11 for ADSL connection, 1x RJ-11 (FXO) for connecting to PSTN
2x RJ-11 (FXS) for VOIP phone calls
4x E'net for IEEE 802.3/802.3u 10/100 Base-T auto-sensing/crossover
1x hidden button for restoring factory default settings
COMPLIANCE: ADSL: ANSI T1.413 Issue 2, ITU G.992.1 Annex A (G.dmt)
ITU G.992.2 Annex A (G.lite), ITU G.994.1 (G.hs)
Max Rate: 8Mbps downstream & 1Mbps upstream
ADSL2: ITU G.992.3 Annex A (G.dmt),ITU G.992.4 Annex A (G.lite)
Max Rate: 12Mbps downstream & 1Mbps upstream
ADSL2+: ITU G.992.5 Annex A (G.dmt)
Max Rate: 24Mbps downstream & 1.2Mbps upstream
ROUTING: NAT/PAT allows multiple users to share Internet access
UPnP IGD with NAT traversal capability
Port Forwarding; Static routing & dynamic routing RIPv1/v2
DNS Relay, Dynamic DNS; DHCP Client/Relay/Svr; IGMP Proxy
Support IP/Bridge QoS for different traffic classes
Support 802.1Q VLAN Tagging
VoIP: Call feature, Call control, Voice Transport, Voice Codec,
Tone/Ring Signal, Tone Detection, Echo Cancellation
Supports FAX/Analogue Modem function via PSTN port
Support RFC2833 RTP Payload for DTMF Digit, Telephony tones & signal
2 FXS ports for VoIP phone call supporting intelligent lifeline b/up
Manual selection of PSTN mode or VoIP mode for making phone calls
Automatic selection of PSTN when dialling an emergency number

Related Stores

seeknbuy.com.au
seeknbuy.com.au

closed Comments

  • Good price.

    But don't get it unless you're going to use the VOIP features - cheaper options otherwise.

    • Agreed. You can get an ADSL2+ modem router for a lot less than this.

  • not really a bargain. Just spend 30 seconds search, got this, more cheaper:

    http://www.ozdirect.com/product_info.php?source=aushopping&o…

    • Whoa, was the title editted? I could have sworn it was $139 at first.

      • Nope, wasn't edited.

    • True, my bad

  • Guys, feel free to vote this -ve to get it off the front page.

  • If the wireless was N spec it might be a good deal

  • One of the most overpriced routers money can buy.

    • It's not too bad…remember it has VOIP built in.

Login or Join to leave a comment