Ubiquiti Unifi 802.11 AC PRO Access Point - UAP-AC-Pro - $226.36 + $16 Shipping @ My IT Hub

1140

Go to Deal

Store Repmyithub on 07/04/2016 - 17:15 myithub.com.au (3067 clicks)
Last edited 12/04/2016 - 18:23 by 2 other users

OzbargainUFI

802.11ac PRO Access Point
The UniFi AC Pro AP features the latest Wi-Fi 802.11ac, 3x3 MIMO technology in a refined industrial design and is ideal for deployment of maximum?performance wireless networks.

Up to 5X Faster with Dual-Radio 3x3 11AC MIMO Technology
The UniFi AC Pro AP supports simultaneous dual-band, 3x3 MIMO technology in the 5 and 2.4 GHz radio bands.

Designed for Optimal RF Performance
The newly redesigned UniFi Controller optimizes RF performance:

Versatile Design
The UniFi AC Pro AP is a gigabit, 802.3af-powered access point suitable for indoor or outdoor use. You can easily replace a standard UniFi AP using the same mounting hardware.

Scalable Enterprise Wi-Fi Management
The UniFi Controller v4 software is a powerful, enterprise wireless software engine ideal for high-density client deployments requiring low latency and high uptime performance. With its software-based capabilities, the UniFi virtual control plane allows for unlimited scalability under one centralized controller. Remotely access the UniFi Controller to upgrade deployed UniFi APs while in the field.

UNIFI
Dimensions 196.7 x 196.7 x 35 mm (7.74 x 7.74 x 1.38")
Weight 350 g (12.4 oz), 450 g (15.9 oz) with Mounting Kits
Networking Interface (2) 10/100/1000 Ethernet Ports
Ports (1) USB 2.0 Port
Buttons Reset
Antennas (3) Dual-Band Antennas, 2.4 GHz: 3 dBi, 5 GHz: 6 dBi
Wifi Standards 802.11 a/b/g/n/ac
Power Method Passive Power over Ethernet (48V), 802.3af/803.2at Supported (Supported Voltage Range: 44 to 57VDC)
Power Supply 48V, 0.5A PoE Gigabit Adapter
Maximum Power Consumption 9W
Max TX Power 22 dBm
BSSID Up to Four per Radio
Power Save Supported
Wireless Security WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
Certifications CE, FCC, IC
Mounting Wall/Ceiling (Kits Included)
Operating Temperature -10 to 70° C (14 to 158° F)
Operating Humidity 5 to 95% Noncondensing
ADVANCED TRAFFIC MANAGEMENT
VLAN 802.1Q
Advanced QoS Per-User Rate Limiting
Guest Traffic Isolation Supported
WMM Voice, Video, Best Effort, and Background
Concurrent Clients 200+
SUPPORTED DATA RATES (MBPS)
802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n 6.5 Mbps to 450 Mbps (MCS0 - MCS23, HT 20/40)
802.11b 1, 2, 5.5, 11 Mbps
802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps

Limit of 300 coupon and 1 per customer.

Related Stores

My IT Hub

• 1
• 2
• 3

• • • 

      Squeezy on 13/04/2016 - 15:04

      I did a firmware update after the original post and the speed is alot better inside the house in various corners but still poor in the adjacent self detached room. Main house Double brick with tiled roof. Standalone room Brick Veener. Seems that everything struggles to exit the house !!

      Been testing with Wifi Sweet spots and it fluctuates between 0 and 11Mb/s which is same as what Fritz box did

      • 

        ryang on 13/04/2016 - 15:18

        Check in the management software what channel it's getting. It should be forcing it to 5Ghz if possible for better speed, if your device supports it.

        Other than that, maybe look at the LR units - they give better coverage.

      • 

        salem on 13/04/2016 - 15:19

        @ryang: 5ghz won't like going through 3 layers of brick. I'd force 2.4ghz out there if possible. Maybe set a separate said for 2.4ghz

• 

  DuaneDibbley on 14/04/2016 - 15:20

  Well this is awesome.

  I had my AP addressed to my Aus Post Parcel locker and these guys couldn't work out how to address it so they decided to leave off all the parcel locker info and send it anyway rather than check with me. So it was sent addressed to my name at the local shopping centre. Real smart. I got no tracking info and because it's essentially not my address at all they sent it to I didn't get the little card to say I had a parcel waiting. I get to show up tomorrow after work and see if the Post Office there will release it to me without the card or any proof I'm the dude it's supposed to go to other than my name.

  Emailed the store and they seem not interested at all to try and rectify. Just tell me that it's ready to pick up blah blah. Spent the first few emails telling me I addressed it wrong. Ugh. Annoying this is it's not even all that much cheaper than Scorptec or other sellers I've dealt with and had great service from.

  • 

    Store Repmyithub @ My IT Hub on 15/04/2016 - 08:48

    Hi,
    As suggested by email a couple of times, Have you tried collecting it from the post office? We can only rectify when you help us and try and get it rectified.
    If you could try and pickup, let us know whether they allow you or not. If not then we can organize the delivery to be returned to us and resend you the item with correct shipment details.
    Apologies and hope this helps.
    regards,

    • 

      DuaneDibbley on 15/04/2016 - 09:21

      Mate, I have it delivered to a parcel locker because it's very hard to get to a post office during their business hours. If I can get out off work early enough today I'll attempt to pick it up.

      It's not very helpful when you screw up the address, blame me for it and just repeat that I try to pick it up to correct for your error at the expense of my own time.

  • 

    salem on 15/04/2016 - 09:01

    I also got a notification from the post office saying that my parcel locker number wasn't on it, and I have to pick it up over the counter. Which is kind of awkward, as I use a parce locker because I can't get to the post office during business hours due to the hours I work.

    So basically I'll be late to work today to go get it, and just hope the boss isn't too mad. :(

    • 

      Store Repmyithub @ My IT Hub on 15/04/2016 - 09:15

      it all makes sense now as we have 2 address column that says Street Address 1: and Street Address 2:
      and if you put Parcel post on address 1 and physical address on Street Address 2:, they are behaved as 2 separate addresses and not 1.
      Please accept my apology.

      • 

        salem on 15/04/2016 - 09:18

        Thanks for the explanation. I hope you get this bug sorted before I want to make another order. :)

• 

  Store Repmyithub @ My IT Hub on 04/05/2016 - 18:34

  Deal Posted for people who missed out last time.
  https://www.ozbargain.com.au/node/246336

• 1
• 2
• 3