This was posted 8 years 7 days ago, and might be an out-dated deal.

Related
  • expired

Raspberry Pi 3 Model B Starter Kit $54.5 (AUS $70.09) Shipped with Code @ ITEAD

710
Raspberry Pi 3 Model B Starter Kit $54.5 (AUS $70.09) Shipped with Code @ ITEAD
Go to Deal
Store RepPStonee on 19/04/2016 - 11:20 itead.cc (4905 clicks)
Last edited 29/04/2016 - 16:04
ITEAD5fs

(PM for wholesale)
Apply code to get $5 off & free shipping
Please make sure select free shipping in shipping method.

Pack Includes

1* Raspberry Pi 3 (RPi3) Model B
1* High Quality Micro-usb Cable, (easily change phone chargers into raspberry pi charger)
1* 16GB Micro-sd Card
1* 0.75M HDMI cable
1* Heat Sink
1* USB Serial to TTL(Foca Pro)
1* 300mm 4 Color Dupont Wire Pack(20pcs)

Pay another US $5.5(Aus $7.1) to get the case, if it's in the same order and use the code, you can get free shipping too.
If you forgot to add the case, please PM me your order number, and i will add it for you：）
https://www.itead.cc/raspberry-pi3-case.html

If you need specific products, not the kit, you could use code
ITEAD2OFF
To get US$2 off for any orders over $20. this code is overlap-able(US$4 off over US$40; US$6 off over US$60, etc.)

Customize your own raspberry pi 3 kit: (no coupon is needed)
https://www.itead.cc/customize-your-own-raspberry-pi-kit
Free shipping over US$50 use code ITEADfs
Free shipping & US$5OFF over US$60 use code ITEAD5fs
Free shipping & US$10OFF over US$100 use code ITEAD10fs

ITEAD PCB (printed circuit board) Service, from $9.9;
24 hours turnaround/ 48 hours turnaround service available.
https://www.itead.cc/open-pcb/pcb-prototyping.html

NEXTION DISPLAY by ITEAD
Design UI for your project without coding knowledge:
http://nextion.itead.cc/download
How to work nextion with raspberry pi 3:
https://www.itead.cc/blog/how-to-use-nextion-to-work-with-ra…

Electrical & Electronics Raspberry Pi Foundation Single Board Computer

Related Stores

ITEAD
ITEAD

closed Comments

  • DrDuck on 19/04/2016 - 11:24
    +2

    Such a shame about the 100mbit ethernet port

    • damion on 19/04/2016 - 11:26
      +1

      What are you going to do with gigabit speeds into or out of such a tiny processor?

      • whats up skip on 19/04/2016 - 16:26
        +1

        Plenty. I transfer close to 100GB to my RPi 2 and then have it upload to the internet.

        There is an article around about testing USB2 to Ethernet on the RPi3 and it reached about 250Mbps. Some improvement, but clearly not Gigabit. If they had included one then it wouldn't have been much faster than this because the limitation is on the internal bridge.

    • cryptos on 19/04/2016 - 11:34
      +3

      X265 hw decode would have been nicer

      • damion on 19/04/2016 - 11:36
        +1

        true that.
        I just paid £3 for my 2 hardware decoder licenses.
        I don't even know what files use WVC1…..

    • troyww on 19/04/2016 - 11:38
      +1

      You like I could try an Odroid C2 . I couldn't recommend it though . The rpi wins everywhere except on hardware specs .

    • cDNA on 19/04/2016 - 12:41
      -3

      you have a 1 Gigabit internet connection or something?

      • DrDuck on 19/04/2016 - 16:14
        +4

        implying that all network traffic is destined for, or originates from, the internet.

  • MJM on 19/04/2016 - 11:26
    +1

    WOW great price OP, I paid AU$75 shipped for my RPi3 only

    • damion on 19/04/2016 - 11:27
      +1

      When?
      I ordered Pi3, power adapter, hdmi cable and case for $80 from element 14 a couple of weeks ago.

      • MJM on 19/04/2016 - 11:28

        Day 1 from Pimoroni…whoops scratch that my $75 included a case too.

        • Store RepStonee @ ITEAD on 19/04/2016 - 11:35

          Case isn't really the core value..

        • Store RepStonee @ ITEAD on 19/04/2016 - 13:10

          @Stonee: But we added it anyway..

        • Blitzfx on 19/04/2016 - 13:46

          @Stonee:
          You added it in for an extra $7.50* Exchange rate isn't anywhere near US$0.78 which you are implying with the $7

          Similarly, this entire deal is going to cost most Australians $73-$74 because BUYING USD is at $0.75, SELLING at $0.79 and the median $0.77

          http://www.xe.com/currencycharts/?from=AUD&to=USD&view=1W

          RS Online have similar price for just RPI3
          http://au.rs-online.com/web/p/processor-microcontroller-deve…
          Stocked locally and free tracked shipping.

        • Store RepStonee @ ITEAD on 19/04/2016 - 13:56

          @Blitzfx: Thanks for correcting, i got the exchange via EX app, it shows 7.005, so i left the 0.005. i am renewing the post now.

        • Store RepStonee @ ITEAD on 19/04/2016 - 14:17

          @Blitzfx: Hi i check the exchange again from ex APP, the exact price should be Aus $7.07
          Case is worth US$10 (AUS $12.86 ), But we are selling in at US$5.5 and free shipping. it should be a good deal.

          about the product you provide, it is not include this one either:
          Foca Pro: USB To Serial UART Converter With XBee Interface Socket
          https://www.itead.cc/foca-pro.html
          this one is with the core value.

        • MJM on 19/04/2016 - 14:20

          @Stonee: BTW mine came with the Pimoroni case, it's actually why I bought from there.

          No offence intended, but I'm not a fan of the official RPi case that you guys are "including" in this deal. I know it's not your case, I'm just clarifying why I bought from Pimoroni

        • Store RepStonee @ ITEAD on 19/04/2016 - 14:32

          @MJM: No offense taken, as you know, ITEAD is having a long term partnership with RPI rep, so we always have enough stocking.
          Also, we don't just sell popular products like Raspberry Pi , we have our own electronic development team and production line, so we also have self developed products lunching every month!

        • cch24 on 19/04/2016 - 16:12

          @Stonee: you added at a cost. You should be clear as your comment is misleasing.

        • Store RepStonee @ ITEAD on 19/04/2016 - 16:17

          @cch24: Hi thank you, as i said, the case is worth US$10 and we are selling at cost US$5.5 together with the kit US$54.5 and free shipping.

        • Blitzfx on 19/04/2016 - 18:52
          +1

          @Stonee:

          Yes, the starter pack is really good value with everything bundled together.
          If I didn't already have a RP3, I would've bought this since you can use the extras for other things as well.

          I wish this was available last month :P

  • terrys on 19/04/2016 - 11:27
    +3

    I just had to give it a plus for the inclusion of the " non-magnetic copper' plugs on the HDMI cable :-p

  • bleugh on 19/04/2016 - 11:30
    +1

    Good price! Is $60+ here for just the pi from elment14

  • skegger on 19/04/2016 - 11:51
    +16

    These US$35 computers get more expensive every time!

  • LaTerrible on 19/04/2016 - 11:53
    +1

    Awesome, bought. Another item I've said a few times 'next time they're on sale I'll grab one', and now here we are.

    Thanks, the free postage really sold the deal.

    • LaTerrible on 19/04/2016 - 14:30

      @Stonee: Just PMd you with my order number, hopefully can still add a case. Thanks!

      • Store RepStonee @ ITEAD on 19/04/2016 - 16:17

        Please check your account :) )

  • SBOB on 19/04/2016 - 12:00
    +3

    still waiting for my IBM raspberry pi :)

    • scorpweb on 19/04/2016 - 12:18

      they'd be shipped by now i had mine pretty quick

      • G Wok on 22/04/2016 - 12:27

        I just got mine too =) where's a good place to get accessories like cases etc for it?

        • scorpweb on 22/04/2016 - 12:45

          just got mine from work. but you can pick them up cheap on ebay. there is a store in brisbane that sells them as well

    • Jetsom on 19/04/2016 - 12:24
      +3

      I received an update on Saturday from them… :(

      "Thank you for registering for the opportunity to attain a Raspberry Pi via our promotion. Due to overwhelming demand, we could not accommodate you in our promotion to the first 1500 registrants."

      • Store RepStonee @ ITEAD on 19/04/2016 - 12:55

        IBM has this problem, but ITEAD has 2000 in stock. :)

        • krouton24 on 19/04/2016 - 12:59
          +4

          ITEAD is charging for them where IBM didn't…

      • boxall on 20/04/2016 - 12:19

        Same email.

    • search on 19/04/2016 - 12:30

      I got an update from IBM this week that I will not get it since I did not make the 1500 cut.

    • igoforthebest on 19/04/2016 - 12:44

      This is the last email I received from them in March…
      Congratulations on being among the first to register for a brand new Raspberry Pi 3 to use with your free Watson IoT Platform trial! In order to accelerate the time it takes to begin exploring the cognitive world of Watson IoT, we are including a microSD card AND the latest Raspberry Pi (the Pi 3) at no cost to you. You will be receiving them at your registered business address over the next few weeks.

      • Store RepStonee @ ITEAD on 19/04/2016 - 12:56
        -2

        LOL, Should have wait and order from ITEAD, we have long term partnership with RPI rep.

        • johnno07 on 20/04/2016 - 07:11

          You know it was free from IBM, right?

      • SBOB on 19/04/2016 - 12:58

        Got the same email but no sign of it yet

        • igoforthebest on 20/04/2016 - 13:02
          +1

          Got mine delivered today :)

        • SBOB on 20/04/2016 - 13:13

          @deepansh:

          holding out hope then :)

        • SBOB on 21/04/2016 - 13:26
          +1

          @deepansh:

          mine turned up today
          definitely the best freebie I can remember scoring

        • igoforthebest on 21/04/2016 - 15:20

          @SBOB: haha same

  • Calvin27 on 19/04/2016 - 12:03
    +3

    Do you have a case to match Rep?

    • glenr on 19/04/2016 - 12:20

      Agreed - love a case to compliment the deal…

      • McFly on 20/04/2016 - 09:30

        a case to compliment

        "What a lovely case!"
        How's that?

    • Jetsom on 19/04/2016 - 12:24

      D'oH! Replied to the wrong comment

    • ysrb on 19/04/2016 - 12:40

      Yes, case please Rep.

    • madamethrifty on 19/04/2016 - 12:55

      A friend of my husband's made a Pi case out of Lego. I thought that was cool :)

    • Store RepStonee @ ITEAD on 19/04/2016 - 12:57
      +1

      YES, RENEWED THE DEAL, PLEASE TAKE A LOOK :)

    • Calvin27 on 19/04/2016 - 13:47

      Thanks - purchased. Do you have an appro delivery timeframe? I'm moving house in 5 weeks.

      • Store RepStonee @ ITEAD on 19/04/2016 - 14:36
        +1

        You should get the kit within 2 weeks:)

  • Ryanek on 19/04/2016 - 12:23
    +2

    I'm curious what are you guys using your pi for? I'm planning to build a garage door sensor to tweet me if it's been open for more than two minutes.

    • giventofly on 19/04/2016 - 13:15

      WiFi Motion Camera that takes photos and emails alerts. It is probably a lot (better) easier to buy an off the shelf one, but I am hoping to customise one for my needs.

    • Blitzfx on 19/04/2016 - 13:32
      +2

      You can do that with an arduino + wifi module. dont need a RP3. really overkill.
      going to use mine as an autopilot with image tracking

    • Neilzy on 19/04/2016 - 16:18

      Am looking at doing this, albeit with a Pi1

      https://www.youtube.com/watch?v=aMhTMgDHGaM

      ill just add it to the list of other sheet i say ill get to one day…

      • Ryanek on 19/04/2016 - 17:27

        That's awesome.

    • Store RepStonee @ ITEAD on 19/04/2016 - 20:23

      try with this one
      https://www.itead.cc/development-platform/arduino/arduino-co…

      • Ryanek on 19/04/2016 - 20:58

        Thanks Rep :) I'm actually using an old pi model A but i'll make sure to bookmark your site for future projects.

        • Store RepStonee @ ITEAD on 19/04/2016 - 21:14

          My pleasure:)

  • Ausbargain007 on 19/04/2016 - 12:24
    +2

    Instead of 300mm 4 Color Dupont Wire Pack(20pcs) and USB Serial to TTL(Foca Pro),a clear case with heat sinks would have been an ideal deal.

    • Store RepStonee @ ITEAD on 19/04/2016 - 12:57

      YES, RENEWED THE DEAL, JUST TAKE A LOOK :)

  • [Deactivated] on 19/04/2016 - 12:32
    +1

    where to apply the code?

    • Store RepStonee @ ITEAD on 19/04/2016 - 12:41
      +1

      go to the shopping cart, right below the shopping cart, there is a spot DISCOUNT CODES, past code ITEAD5fs and you can get the discount :)

      • [Deactivated] on 19/04/2016 - 12:57

        Thanks

      • [Deactivated] on 19/04/2016 - 13:18

        PM sent for case..

        • Store RepStonee @ ITEAD on 19/04/2016 - 13:24

          Creating order, will sent you in 5 mins

  • search on 19/04/2016 - 12:32

    Does this really come with 10.75M HDMI cable? That is great value.

    • boomramada on 19/04/2016 - 12:38
      +1

      You wish, 1x0.75

    • Store RepStonee @ ITEAD on 19/04/2016 - 12:43

      Yes, it's 0.75 M, it is enough for the starter kit.:)

  • boomramada on 19/04/2016 - 12:43

    Wish you have cases tho :(

    • cookie_lu on 19/04/2016 - 12:47

      …..in the deal.
      They do have a suitable white case in their product list.

    • Store RepStonee @ ITEAD on 19/04/2016 - 12:59
      +1

      Just added, please renew the deal:)

  • Myrz on 19/04/2016 - 12:56

    Rep I forgot to add the case to my order. Can you sort this out for me? I've PM'd you the order number

    • Store RepStonee @ ITEAD on 19/04/2016 - 12:59

      SURE DO, pm your order number:)

  • EnvisionAU on 19/04/2016 - 13:25

    Any chance you have Pi Zero stock?

    • Store RepStonee @ ITEAD on 19/04/2016 - 13:47
      +1

      It's price is much lower than it's cost, so RSP stopped producing it.

      • chrisl123 on 19/04/2016 - 15:13

        I don't believe so: https://www.raspberrypi.org/blog/game-boy-zero/

        Raspberry Pi Zero production is restarting in Wales next Monday [18th April, yesterday] after a hiatus to allow us to focus on Raspberry Pi 3 (a million units built and counting). We have placed 250ku of new orders, and are aiming to produce at least 50ku/month for the rest of this year. Distribution will continue to be via Pimoroni, Pi Hut, Adafruit and Micro Center for now.

        To thank you for your patience, we’ve taken advantage of the hiatus to add a (much requested) new feature. I’ll leave you all to guess what it is (it’s not WiFi).

        • Store RepStonee @ ITEAD on 19/04/2016 - 16:22
          +1

          I respect that. my version of saying is from their production partner. you can choose either version to believe. :)

  • [Deactivated] on 19/04/2016 - 13:31
    +2

    I'm not really a big fan of raspberries. Do you have any blueberry pies instead?

  • kingmw on 19/04/2016 - 13:47

    Website is timing out badly

    • Store RepStonee @ ITEAD on 19/04/2016 - 13:49

      It works well from my side.. you can refresh it..

      • kingmw on 19/04/2016 - 13:49

        Thanks, it's working now.

  • scrimshaw on 19/04/2016 - 13:50
    +1

    I don't want the 20x cables and SD card, what if I just want the Hdmi, case, heatsink and the pi itself? How much would that work out?

    • Store RepStonee @ ITEAD on 19/04/2016 - 14:19

      pm ME please and i will work out a deal for you

  • cch24 on 19/04/2016 - 14:02

    Sent a PM re adding case to order. Thanks

  • OnTheMark on 19/04/2016 - 14:03

    I don't need the extra stuff in the kit, so any chance of a deal on just the Raspberry Pi 3 on its own?

Login or Join to leave a comment
Login Join