24% off Supply & Install Price of Garage Roller Door Opener $495 (Was $650), Supply Only $220 (Was $350) + Shipping @ AR Access

20

Go to Deal

Store RepARACCESS16 on 29/08/2016 - 13:35 araccess.com.au (206 clicks)
Last edited 29/08/2016 - 13:46 by 1 other user

OzBargain-16

For those of you that have not yet enjoyed the benefits of a remote controlled garage roller door opener,
We have promotional offers on electric roller door operators.

SUPPLY ONLY:
From $220(was $350) + two hand-held remotes + 1 wireless wall-mounted button (coupon code: OzBargain-16)
Supply Only Link: http://www.araccess.com.au/product-category/garage-door-open…

SUPPLY & INSTALL:
From $495(was $650) + two hand-held remotes + 1 wireless wall-mounted button.
Installation covering Melbourne metro ONLY!
Terms & conditions apply.

CALL 03 9551 4443 NOW. Turn your manual garage roller door into an AUTOMATIC one. visit our website for more information:
http://www.araccess.com.au

Related Stores

Automatic Remote Access

• 

  chefdillu on 29/08/2016 - 15:39

  ATA GDO-6 EASYROLLER® GEN2 is the best quality in motors available for around $280 on ebay

  http://www.ata-aust.com.au/garage-door-openers/rolling-door-…

  • 

    Store RepARACCESS16 @ Automatic Remote Access on 29/08/2016 - 15:46

    Thanks for your comment,
    The motor you are referring to, is a weaker product as our units come with max output rating of 1000nm while ATA GDO-6 EASYROLLER® GEN2 comes with 600nm.
    Our unit is $220 with two handheld remotes and one wireless wall-mounted button which is still cheaper that ATA GDO-6 EASYROLLER® GEN2.
    Best Regards,
    Automatic Remote Access Team

• 

  pork chop on 29/08/2016 - 17:48

  Hi Op can u advise what is the min space required above the door opening to install one? My current door is the old flip style and I was told some yrs ago there was not enough overhead space.

  • 

    Store RepARACCESS16 @ Automatic Remote Access on 30/08/2016 - 09:46

    Hi and hope you're well. Thank you so much for your inquiry. There in no requirements for headroom to install our roller door opener. Generally, the average curtain roll size for a roller door is between 300mm and 450mm. The motor will be mounted to the curtain and minimum side room of 150mm is required. The motor is installed on the side of the roller door and the standard requirement for side room is 220mm but with 150mm of side room you should be able to install the motor. For more information please refer to this link:
    http://www.araccess.com.au/residential-garage-doors/standard…
    I hope I could resolve your inquiry and if you need more information please don't hesitate to give us a call on 03 9551 4443.

    Best regards,
    Automatic Remote Access Team

    • 

      pork chop on 30/08/2016 - 11:31

      Thanks Rep. Will check tonight. Could be a bit tight.