This was posted 5 years 3 months 11 days ago, and might be an out-dated deal.

Related
  • out of stock

KIWI Design Wall Mount for Google Home Mini $11.89 + Delivery (Free with Prime/ $49 Spend) @ IO TESAI Amazon AU

960
KIWI Design Wall Mount for Google Home Mini $11.89 + Delivery (Free with Prime/ $49 Spend) @ IO TESAI Amazon AUAffiliate
Go to Deal
Cashback
Clear on 09/01/2019 - 19:57 amazon.com.au (4562 clicks)
Last edited 09/01/2019 - 21:21
QJZLX8J5
This post contains affiliate links. OzBargain might earn commissions when you click through and make purchases. Please see this page for more information.

Asked the store for a deal and they provided a coupon that works on both Black and Grey Only Black left in stock.

These are good for mounting your Google Home Mini on the wall, ceilings or wherever else you have a power point. They reduce the cable mess and both holders connect to each other via magnets. I personally use a few mounted in the bedroom and behind the TV.

  • Apply the coupon QJZLX8J5 at checkout.

Don't forget to stack with your favourite cashback provider - coupons are usually tracked by Amazon.

Price History at C CamelCamelCamel.
Electrical & Electronics Google Home Mini Accessory Holder Kiwi Design Mount

Related Stores

Amazon AU
Amazon AU
Marketplace
KIWI design Direct AU
KIWI design Direct AU

closed Comments

  • afoveht on 09/01/2019 - 20:05
    +2

    I personally use a few mounted in the bedroom

    I feel funny enough when the cats come into the room.

    • Clear on 09/01/2019 - 20:07
      +1

      Considering I talk in my sleep I've probably set it off a few times in my dreams. Maybe I should take it out incase it calls someone :P

      • Ostrk on 09/01/2019 - 21:38

        Lets hope you aren't having a…happy dream and it calls your parents.

  • Gristy on 09/01/2019 - 20:08

    These do not fit AU plug it is for the USA version

    • Clear on 09/01/2019 - 20:08
      +3

      They're a very tight fit.

      • bobdane1 on 09/01/2019 - 20:21

        Bought one for AU plugs and it's a super very tight fit. But it does fit…

      • xev on 09/01/2019 - 20:22
        +16

        Giggidy.

    • pitpicker on 09/01/2019 - 20:12
      +1

      Can confirm this, the AU plug do not fit at all.

      • 911r on 09/01/2019 - 20:14
        +3

        It fits, it's just a huge struggle. Got one from the last deal.

        • norkle on 09/01/2019 - 20:22

          Confirm, tight but works. We tried and failed, contacted them and tried again.

    • SBOB on 09/01/2019 - 20:14
      +1

      100% doesnt fit?

      shame, as was just about to grab one :/

      • RUSSLE L on 09/01/2019 - 20:21

        They are just to tight to… Get in

        • Trantor on 09/01/2019 - 20:50
          -1

          That's what she said!

    • PurchaseAnxiety on 09/01/2019 - 22:27

      It takes little elbow grease, but it gets in there without too much hassle and is perfectly functional.

  • impoze on 09/01/2019 - 20:15
    +1

    These are a tight fit as Clear has mentioned but they do work.

    Note that they do make it hard to use the second power plug.

    I ended up using my dremo to cut down some of the home mini plug since it's quite wide and hard to use side by side with another plug.

    • [Deactivated] on 09/01/2019 - 21:19
      -1

      Making it a tight fit does make things hard.

    • asa79 on 10/01/2019 - 11:07

      Given that the original plug still makes it hard to use the second plug, stupid plug sizes

  • Austrian Oak on 09/01/2019 - 20:25
    +8

    I used 3M mounting squares from Bunnings. Hasn't fallen yet.

    https://bit.ly/2AyvAhh

    • Name on 09/01/2019 - 21:24

      Same. But only did it a few weeks ago. So only time will tell.

    • ndftz on 10/01/2019 - 09:27

      Same but a few of them fell

      considering the one they sell at JB HiFi with wall hook

  • RevBargain on 09/01/2019 - 20:27

    Bought. I'll make this work. Realistically could have just used some removable picture hanging tape (the new stuff is similar to Velcro with two pieces)

  • m0nkeycheese on 09/01/2019 - 20:31

    Ive been looking for a ceiling mount, flush mount would be nice

  • dtox on 09/01/2019 - 20:59

    My order came to $11.89 with code ($5.10 discount)

    • Clear on 09/01/2019 - 21:00

      Woops I typo'd. Thanks!

  • TimtamTinTin on 09/01/2019 - 21:13

    Thanks.. got one 👍

  • Frozensage on 09/01/2019 - 21:17

    Would this work with google WiFi ?

  • drilly on 09/01/2019 - 21:20
    +1

    Can anyone still add grey? can't seem to find it

    • magic8ballgag on 09/01/2019 - 21:59

      Same, would prefer grey over black.

      • congo on 10/01/2019 - 09:02

        I prefer yellow.

  • markdownhunter on 09/01/2019 - 21:21

    It fits just don't shove it in the whole way. It works fine I've got 2

  • AdamFury on 09/01/2019 - 21:38

    I have one of these and it's fantastic!

  • klaw81 on 09/01/2019 - 21:54
    +1

    Plenty of designs in Thingiverse that can be 3d printed, if you have access to one. I've tried a few of them with great success, and they only cost a couple cents in plastic.

    • RevBargain on 09/01/2019 - 22:24
      +2

      Good thought. I always forget about my local 3D printers. So cheap https://www.3dhubs.com/how-to

      For those who don't know… You get the object from thingiverse and find a hub through the link above

    • drilly on 09/01/2019 - 22:43

      Good idea! i didn't even think about that. I know someone who does 3d printing if anyone wants to send me a PM or am i allowed to just link them here?

    • outlander on 10/01/2019 - 00:05
      +2

      My local library lets you print things for pretty cheap. I'm sure there are others that offer the same service

      • bozbargain on 10/01/2019 - 09:58

        I just checked my local library. Fixed usage cost of $10 plus 10c per gram. Very cool that they have the option (and provide a free training session as well), just not economical for this purpose!

        • outlander on 10/01/2019 - 10:39

          That blows. Mine is $1.50 per hour flat rate.

    • magic8ballgag on 10/01/2019 - 08:58

      You're assuming everyone has access to a 3D printer.

  • unrealshots on 09/01/2019 - 22:12

    Are the built in power bank one any good?

    https://www.amazon.com.au/KIWI-design-Battery-Compatible-780…

  • Bullion78 on 09/01/2019 - 23:45
    -2

    Why do people willingly bug their homes with these?

    • Clear on 09/01/2019 - 23:48
      +2

      This is just a mount it doesn't have a mic.

      jk I know you mean Google Mini. If you have a mobile phone then you're already bugged ;)

      • onlinepred on 10/01/2019 - 17:59

        Only if you turn that feature on.

    • nardz on 10/01/2019 - 00:24
      +1

      How's that tin foil hat going?

    • magic8ballgag on 10/01/2019 - 08:59

      What type of foil do you use for your hats? Normal or heavy duty?

    • asa79 on 10/01/2019 - 11:11

      You are aware that its not stored public, its stored in your cloud account just like all your facebook is stored in your facebook account

  • TightAssDrake on 10/01/2019 - 05:01

    How do I use this if I already threw my Google Home Mini in the bin?

  • YellowKnight on 10/01/2019 - 09:40

    Is there an AU version of this?

    • Clear on 10/01/2019 - 09:41

      No just this tight fitting one.

  • cheapo999 on 11/01/2019 - 23:54

    Just received the item. To say super tight fit is an understatement.

  • 911r on 14/01/2019 - 08:45

    These were much easier to put on that then first batch. Also came with a magnet to position in a wall etc.

Login or Join to leave a comment
Login Join