This was posted 2 years 11 months 10 days ago, and might be an out-dated deal.

Related
  • expired

50L Vertical Air Compressor $169, Heavy Duty Workstation $299, Plasma Cutter $299, Air Nailer/Nibbler $40 @ ALDI

220
50L Vertical Air Compressor $169, Heavy Duty Workstation $299, Plasma Cutter $299, Air Nailer/Nibbler $40 @ ALDI
Go to Deal
c64 on 26/05/2021 - 10:09 aldi.com.au (2894 clicks)
Last edited 26/05/2021 - 17:01 by 1 other user

Vertical Air Compressor 50L $169
https://www.aldi.com.au/en/special-buys/special-buys-sat-5-j…
2hp compressor ideal for running a wide selection of air tools
Maintenance-free, oil-free pump
Pressure gauge for regulated working pressure
Dual, quick release Nitto fittings
Operating pressure 10bar max.
The FERREX 2hp 50L Vertical Air Compressor is the perfect accessory for all your air tool needs
Not only does it have enough power to run a wide range of accessories, its vertical construction means it stores away easily after use, taking up less room in your garage or shed

Heavy Duty Workstation $299
https://www.aldi.com.au/en/special-buys/special-buys-sat-5-j…
Powder-coated steel frame in hammertone
With 3 drawers, integrated metal pegboard back and rubberwood work surface
Size: 114cm(W) x 61cm(D) x 158.5cm(H)
Knocked-down construction with powder coating
Worktop material: 15mm thick, solid rubberwood
Easy-glide drawers with ball bearing slides
Top storage shelf
Lower storage shelf for larger tools and supplies
Maximum weight loading summary – top storage shelf: 25kg, pegboard: 25kg, worktop: 250kg, bottom shelf: 100kg, small drawers: 25kg each and large drawer: 25kg
Total maximum loading capacity: 475kg
Includes 6 steel hooks
Hammertone powder coating

Air Nailer or Air Nibbler $39.99
https://www.aldi.com.au/en/special-buys/special-buys-sat-5-j…
Choose from an Air Nail/Staple Gun which takes 100x50mm nails or 100x40mm staples or an Air Nibbler, perfect for the next time you need to cut sheet metal

Plasma Cutter $299
https://www.aldi.com.au/en/special-buys/special-buys-sat-5-j…
For precise and clean-through cutting, up to a material thickness of 12mm
This powerful and compact device with a robust housing and handle, is the perfect tool for straight and round cutting of sheet steel, stainless steel, aluminum and copper
2.5m cutting cable with exchangeable torch attachments
Compatible with standard compressors
2m ground cable with strong clamp

Air Hose Reel 9m $49.99
https://www.aldi.com.au/en/special-buys/special-buys-sat-5-j…
Automatic stop function and self-returning rewind function
Nitto-style fitting and 3m connecting hose
Durable, wall-mountable housing
Position this near your Vertical Air Compressor to provide up to 9m of ultimate working flexibility – long enough to get around just about any garage or shed

Assorted Air Tools $29.99
https://www.aldi.com.au/en/special-buys/special-buys-sat-5-j…
Deluxe Air Spray Gun, 3/8" Air Ratchet Wrench, 1/2" Air Impact Wrench or Air Sand Blaster Gun
The ideal range to satisfy your needs!
Choose from a Deluxe Air Spray Gun for the perfect finish on your next painting job, an Impact Wrench or Ratchet Wrench for tightening or loosening bolts or a Sand Blaster Gun to make your next sanding job easy

Home & Garden Air Compressor Air Nailer Plasma Cutter Workstation

Related Stores

ALDI
ALDI

closed Comments

  • Muzeeb on 26/05/2021 - 10:15
    +15

    Wife: just going to Aldi. Do you need anything?

    Me: a tin of 5 bean mix oh and a plasma cutter

    Wife: ok

    • Boogerman on 26/05/2021 - 11:38
      +4

      Can openers are so unreliable, aren’t they?

  • EchoEcho on 26/05/2021 - 10:28
    +2

    Now the wait for Bunnings to pre-emptively match/beat these prices…

  • Manny Calavera on 26/05/2021 - 10:36
    +1

    Plasma cutter is just a beefy blowtorch right?

    Sear that sous vide steak!

    • Quarn on 26/05/2021 - 11:28
      +1

      How dare you talk about the forth state of matter in such disparaging terms!

      • Switchblade88 on 26/05/2021 - 20:22

        That was nothing but the highest compliment - A portable beef BBQ is nothing to blow off

        If you turn your rump into an aerosol though, that's nothing but user error.

  • peeppeep on 26/05/2021 - 11:05
    +3

    Time to indulge those bank heist fantasies

    • Boogerman on 26/05/2021 - 11:39
      +1

      The Aldi thermal lance….only $499!

    • [Deactivated] on 26/05/2021 - 13:17
      +1

      Would be poetic if Aldi plasma cutter was used to rob an Aldi

  • whitelie on 26/05/2021 - 11:08

    Might have to grab the hose reel after my good Alemlube one shat itself. 9m is probably too short though :/

  • JobbaWobba on 26/05/2021 - 11:20

    Anyone know much about painting the exterior brick on a house? Do I just need one of these air compressors with a paint spray attachment? Or does anyone have any advice?

    • SwarleyAUS on 26/05/2021 - 11:23

      You can do it with a brush/roller… this just makes it quicker. If you are using water based paint you just need to thin it with - you guessed it, water - to use in one of these spray guns

    • c64 on 26/05/2021 - 11:50

      maybe an airless sprayer is better? depends on how big an area you want to paint.

      • JobbaWobba on 26/05/2021 - 18:26

        What's the difference sorry? House is probably 10mx20m for full exterior

    • qwerks on 26/05/2021 - 11:56
      +1

      My 2 cents.. Brush and roller would be cheaper and you wouldn’t need to worry about overspray, especially if there is wind and you are near neighbours. Painting using a roller and brush is like cooking: the cooking and painting part is relative quick the prep and cleanup is what takes most of time. Once you’ve setup the painting process is just a quick as spraying would be especially if it’s your first time. Admittedly cutting in with a brush can be annoying as a first timer.

      • JobbaWobba on 26/05/2021 - 18:25

        The brick is a bit porous and holey so my thinking was a roller would miss a lot and I'd inevitably be painting ach brick by hand then. I was thinking a sprayer would get those holes a little easier

  • Rorzaborg on 26/05/2021 - 11:52

    No CFM measurement listed for the air compressor, most likely very light duty I'm guessing?

    • flipfire on 26/05/2021 - 12:19

      It will probably be similar to the older taurus one, which was a loud unit

      http://www.discountstoresau.com/catalogue/images/aldi-catalo…

      • Rorzaborg on 26/05/2021 - 12:25

        Makes sense, cheap direct drives are usually pretty loud

        If that CFM is accurate then that's pretty good for the price, I'm guessing that it would struggle to output anywhere near that airflow at high PSI

  • The Hobo on 26/05/2021 - 12:38

    Are there any alternatives to this vertical compressor? Quite like the form factor but not liking my chances of getting one from Aldi

    • camh on 26/05/2021 - 13:35
      +1

      I think the search term you want is "upright air compressor". Sydney Tools has this: https://sydneytools.com.au/product/fendi-fen50-50l-2hp-oil-f… (and also a 30L shorter version), but I can't find any reviews on the Fendi brand. Total tools has this https://www.totaltools.com.au/117585-ironair-2-5hp-60l-verti… for $399 ($100 off) - obviously not in the same price ballpark, but the reviews I saw of the brand (Ironair) were good.

      I've been tempted by this Aldi compressor before, but if something goes wrong, I suspect all they can do is give your money back - they probably don't have facilities to fix it and since stock is so sporadic, replacement is unlikely. I prefer to check what bunnings have when they match price - they have a Ryobi one: https://www.bunnings.com.au/ryobi-40l-oil-free-upright-air-c… but that is only 8 bar / 115 PSI and 170 l/min (6 cfm), and a 40L tank. Plus the one review there says it is overly loud.

      So I am tempted by the Fendi, but really, I should just stop buying tools I don't have much of a need for.

      • The Hobo on 26/05/2021 - 18:24

        Cheers, I did see the Fendi, but the lack of reviews/information made me a bit reluctant to jump on it.

        The total tools one is out of my budget, as it's more for 'hobby use' (not entirely what it will be used for yet)

        Guess i'm stuck trying to grab an Aldi one when it becomes available!

    • Valjew on 26/05/2021 - 20:06

      "not liking my chances of getting one from Aldi" - is this stuff typically like Black Friday doorbuster difficult to get? I've only once specifically went to buy a "special buy" item at Aldi - rocked up late in the day and had no issue getting what I needed.

      • The Hobo on 27/05/2021 - 14:05

        They usually only have 1-2 per store, so can sell out pretty quick!

    • c64 on 27/05/2021 - 08:37
      +1

      they sell all the good stuff on saturdays to make it easier for you to get there

  • Jettblack on 26/05/2021 - 13:08
    +3

    Any better work station for around the same money? Even $100 more

    • Valjew on 26/05/2021 - 20:04

      Also interested in what's generally available…

  • resubaehtgnolhcs on 23/06/2021 - 18:48

    “On sale Saturday 5 June” - ok where’s my time machine….?

Login or Join to leave a comment
Login Join