• expired

[Prime] XTAR VC4 LCD 4 Bay Universal 18650 Battery Charger $24.59 Delivered @ XTAR direct via Amazon AU

130
This post contains affiliate links. OzBargain might earn commissions when you click through and make purchases. Please see this page for more information.

XTAR VC4 LCD 4 Bay Universal 18650 Battery Charger… $24.59 delivered.

4 Bay Universal 18650 Charger: XTAR VC4 18650 charger can charge for any 1.2V Ni-MH/Ni-CD AAAA/AAA/AA/A/SC/C/D batteries and 3.6V/3.7V Li-ion/IMR/INR/ICR 10440 14500 14650 16340 17335 17500 17670 18350 18490 18500 18650 18700 20700 21700 22650 25500 26650 rechargeable batteries.(Note: VC4 could not charge 18700/20700/21700 protected batteries)

Price History at C CamelCamelCamel.
This is part of Amazon Prime Day sales for 2025

Related Stores

Amazon AU
Amazon AU
Marketplace
XTAR direct
XTAR direct

Comments

  • +3

    Paid this in June, replaced the old stock Eneloop charger which finally died after 12 years of service lol. Pretty good little charger.

    • Looks like this comes with a $10 voucher for your next eligible order but I don't have prime & not buying one so can't confirm.

      If anyone buys it please reply & let me know if it gets added to your account?

      • +1

        I don’t see it on my acc just the NAB $10 off $80 offer

  • Best nimh charger brand. But this is the base model. The one with extra letter (VC4LSJFDTHVXDJKGFT) or whatever the letters are add faster charging and usbc connector instead of dc pin

    • I meant best budget brand *

    • The USB C version is $33, and says "new model" not sure if improved or just added USB C .

      • This one charges at 1A, the Plus charges up to 3A I believe.

  • +1

    It does not charge those 1.5V Li-ion AA/AAA batteries.

    • And this model only charges NiMH AA and AAA up to maximum 0.5A only? If so, that is slow.

    • +1

      You need the XTAR VX4 for that, which is almost double the price.

      • Yep, starting to get a bit too expensive for that VX4.

        • VX4 still probably worth it at current price for future-proofing I reckon. Looks like the best device to cover all bases, USB-C and gives charging rate control.

          • +1

            @Qbagger: VX4 still has slow maximum charging speed of only 0.5A for NiMH AA/AAA batteries, that's terrible. The old Nitecore D4 charger I have been using for years can charge up to 0.75A.

            • @edfoo: Ahh that's a good point. I didn't realise that the higher charging is only for lithium batteries. Bugger!

              • +1

                @Qbagger: Plus this VX4 can only charge at maxmum 1A when all four batteries are being charged. OK but could be faster. The Vapcell S4+ charger can charge up to 3A when all four batteries are being charged, it is slightly more expensive but it does not utilise USB-C port.

        • VX4 if you want nimh, 1.5v li-ion, 3.7 li-ion and 3.7 lfp charging ability. otherwise the cheaper ones will do the job. Be nice if they had a 8 battery version of the VX4, as i have plenty 1.5v li-ion AA/AAA.

  • From what I read, this is a good brand.

    I don't want to get the cheapest model, though.

    Which do you guys recommend from their other models? Do they come with an AU plug?

    I see they have a VX4, VC4SL/Plus, VP4 Plus.

    I would like something that does up to C size batteries. Not sure if I need D size capability.

    Current batteries I have to charge and Eneloop regular and pro versions of the AA & AAA (I bought this on sale last time from Amazon, but still don't have a charger to use them).

    • +1

      They have some comparison tables if you search their website xtar.cc

      XTAR VX4 takes USB-C input. It might be sold alone or with an AU USB-C supply (kit vs set).

      If you're charging a lot of NiMH AA and AAA, maybe XTAR VC8SL or ISDT N8 or N16. Then again, Olight Ostations might be worth checking out if you just have AAA and AA NiMH.

      The 0.5A charge and 0.3A discharge rates for some NiMH chargers can be a deal breaker. Some more advanced chargers allow you to select a wider range of currents.

      I have about 20 or so chargers (XTAR, Vapcell, ISDT, Gyrfalcon, SkyRC, Powerex). Happy to answer questions.

      • Any four-battery chargers that support those newer 1.5v li-ion batteries and has a maximum charging rate of at least 1A or faster when charging 4 batteries, including AA NiMH batteries?

        • +1

          Vapcell BL4. Except 1.5V Li-ion is limited to 0.5A charging on most chargers.

          It's probably my favourite for charging small flat top 3.7V Li-ion cells because the positive and negative terminals have little notches on the charger.

          I'd say XTAR VX4 but NIMH is limited to 0.5A.

          The Vapcell BL4 is a bit more configurable.

      • would like an 8 battery version of the VX4! :)

      • Sorry for the late reply. I appreciate it.

        I think I want something that can do AAA, AA, C and D sized batteries. I think a 4 battery charger will be enough.

        I really don't know which to get. I want to order something by tomorrow, though, as I've needed a charger for a while now so that I can at least start using these Eneloop regular and pro AAA, AA batteries. Just curious, what current level is good for Eneloops?

        Not what what charge current I should be using. Would a charger that can change the current levels be a better bet?

        Is there anything in the $50-$100 range you'd recommend over any of the Xtar chargers I list (VX4,VC4SL/Plus, VP4 Plus).

        If going with an Xtar, which one do you recommend?

        And the VX4, is that USB-C power input only? I wouldn't mind a charger that can have both a mains power plug and USB-C charger? What do most people prefer in regard to the power input for the charger?

        I've heard of Vapcell, but haven't heard of those other brands. Any specific models I can take a look at?

        • +1

          0.5A for AAA 750-900mAh and 1A for AA 1900-2450mAh is a good rule of thumb. About 0.5C or a current half of the capacity (e.g. 1900/2=Approx 1000mA or 1A).

          XTAR tend to be limited to 0.5A for NIMH. MX4 will get the job done.

          I try to avoid chargers with AC input due to the risk of being electrocuted by touching the sliders if there's significant AC leakage. The only one that I've used with AC input is the SkyRC MC5000.

          I'd recommend USB or DC input.

          Vapcell BL4, Vapcell S4 Plus V3 are two good chargers that I'd recommend. The S4+ takes 12V 5A DC input.

          • @Tim Mc: I don't know much about AC vs DC. Can you still get one that plugs into a wall socket that converts the AC to DC?

            I'll have a look at those chargers you recommended.

            The USB-C ones, can they be used with USB A (if you get a USB C to USB-A cable) or does that not provide enough power?

            I had a look at the SkyRC MC5000. Looks like a beast of a charger. Overkill for me at this point, though.

            Which is the newer between the BL4 and S4+? I assume the BL4. So you'd recommend either of these over any of the Xtar ones that are in a similar range?

            And where are the best place/s to buy these?

          • @Tim Mc: Slow 0.5A charging for NiMH AA batteries is a deal breaker for me.

          • @Tim Mc: No idea what charger to get. Trying to find some time to do some more research. Is it going to be a deal breaker to not get one of these Xtar ones from the Prime Day sales, or am I likely to get something else like the Vapcell or other brand chargers at decent prices outside of the Prime Day sales?

            • @Ice009: XTAR might have price drops on other newer products in the coming months.

              VC4 is getting a bit long in the tooth.

              Vapcell BL4 or S4+ V3 might be cheaper on AE, BG and some resellers like Sofirn.

              • @Tim Mc: Thanks.

                Which would you buy out of the Vapcell ones and the Xtar ones?

                That's the other thing. I don't know which models are old and new. It seems some of these chargers have been around a while.

                I had a look at the SkyRC MC3000 (not the 5000) since you mentioned that brand above. Looks like a really great charger. If that was a bit cheaper (closer to $100), I think I would have bought that. Seems a few people said it's a bit complicated to use, though?

                • @Ice009: I'd probably go with the Vapcell BL4 because you can set the charging current with a wider range of options.

                  I'm rotating between Gyrfalcon S8000, SkyRC MC5000, Vapcell BL4 and SkyRC NC3000 Pro. NC3000 Pro for AA/NiMH. BL4 for small 3.7V Li-ion. S8000 and MC5000 for larger 3.7V Li-ion.

                  MC3000 hasn't been completely replaced by MC5000 because it lacks "favourite" (or memorised) programs where you can configure it how you want and quickly recall a program. S8000 might be a viable replacement but sliders on the first batch aren't great (they're releasing an updated version with better sliders). They're pretty straightforward if you read part of the manual for the basics.

                  Disclaimer: I started testing chargers a few years ago from different brands. They send samples. There are reviews my different people out there (e.g. HKJ).

                  • @Tim Mc: Didn't know you did reviews. I actually just stumbled upon one of your reviews while searching for reviews on the BL4
                    https://budgetlightforum.com/t/vapcell-bl4-charger-and-capac…

                    I'll watch the review later tonight or tomorrow.

                    So the BL4 should be OK for Eneloop batteries (both regular and pro?) as this is what I am going to start with.

                    The MC3000 looks good. What is the average price of that? I found a review of the Gyrfalcon S8000
                    https://timmcmahon.com.au/posts/gyrfalcon-s8000/ seems like that is yours too. I was actually reading some of these review a day or two ago not realizing they're yours ;).

                    • @Ice009: Vapcell BL4 is ok for eneloop AA/AAA and eneloop pro AA/AAA.

                      MC3000 has been around for a while. You might find them on AE. MC5000 is supposed to phase it out (that's about AU$197). I haven't used the MC3000. With 20+ chargers I'm finding it hard to justify getting a model that's on the way out.

                      I'll make a video tutorial of the S8000.

                      The S8000 can be controlled via PC over USB with HKJ's TestController app. It's cool how Enova has tried to engage the community on BLF for feedback to improve the firmware and hardware.

  • Hows this compare to the kiitalitto from aliexpress?

  • XTAR is celebrating their 19th anniversary this month so it's worth keeping an eye on their current and upcoming line-up.

Login or Join to leave a comment