brettule » user profile

Member Since 26/03/2009
Last Seen 22/04/2024
Badges 2
Location Melbourne

Recent Activities

Working remotely for an extended period of time which isn't my usual desk with a dock setup. Say I have to work from grandma's house for a…
17/04/2024 - 09:29
Yep. It's a screen cover that feels like it's made from cardboard, it flips over to the back side and becomes the stand. Indoors it's ok,…
17/04/2024 - 07:10
Thanks. I need the PC model not the AV unit.
05/04/2024 - 11:36
Went for a Deco setup in the end. Does the job.
30/03/2024 - 08:43
Cheers for that. However, none are in stock.
27/03/2024 - 10:07
Gotcha. How do you turn on/off the powerboard, is it that big red button? The problem is that I need the master device to control the slave…
25/03/2024 - 15:02
In the description it says "CANNOT BE USED FOR ANY OTHER PURPOSE THAN TO HAVE THE TELEVISION PLUGGED INTO THE MASTER SOCKET AS IT IS NOT…
25/03/2024 - 09:17
It says this power board has automatic power off after an hour, that's going to annoy me. I want to control when and how the devices power…
25/03/2024 - 09:16
Not all BIOS support booting with a resumption of power, the trusty old HP I'm using does. I'm looking for any device, including a…
25/03/2024 - 09:14
Sweet. Great advice. Thanks.
22/03/2024 - 14:52
My setup is all triggered around an old bakelight pull switch. Ya know those ceiling mounted switches with a pull cord? When I yank on…
22/03/2024 - 13:34
The $30 link is sold out. I thought I read somewhere around here that the Embertec devices are prone to failure becuase of the way they do…
22/03/2024 - 13:13
Yeah, no stock.
22/03/2024 - 13:09
Yeah the monitor I care much less about, I think it does power down. The amp however is an awesome old 80's Mitsubishi DA-U300Z, no IR.…
22/03/2024 - 11:22
excuse my ignorance, but do the Tuya devices need to be always connected to the internet to perform the logic program or do they cache the…
22/03/2024 - 10:19
So I could set the slave to power on/off based the power draw required from the master?
22/03/2024 - 10:14
I've been using an Embertec SmartSwitch in my shed for years which has finally died on me. I have an old laptop hooked up to an old amp and…
22/03/2024 - 09:37
My RTX 3080 is munted so I'm looking for a replacement. Budget is $1k but can go a little higher if need be. Primarily I want to game with…
15/01/2024 - 07:59
Cashback noob here. What are the steps I need to do to get both the $75 off and the 14% cashback?
09/11/2023 - 09:33
Not yet, you f'n ledge!
08/11/2023 - 18:24
That's cheap compared to all the other quotes I've had. Thanks. I've gone with Auspost now.
08/11/2023 - 12:42
You are a GEM! AusPost was perfect. Thank-you!!!!!
08/11/2023 - 11:57
It's permit paking only around here and there is only 1 permit issued per house so we are stuck as a 1 car household. To get your P's these…
08/11/2023 - 11:44
It's permit paking only around here and there is only 1 permit issued per house so we are stuck as a 1 car household.
08/11/2023 - 11:38
My 18yo son recently got his P's and my policy doesn't cover under 25yo drivers so I need to find a new insurer. I'm new to having a young…
08/11/2023 - 11:03
That looks like it powers on via IR remote. I'm after a current sensing master/slave board so that all the slaves come on when the master…
19/10/2023 - 07:02
## Merged from [A Semi-Smart Power Plug That Turns on and off Slave Devices](/node/806416) I'm after a not very smart power plug that is…
18/10/2023 - 20:13
The power supply for it is a 2 pin US plug. Will it just run off any old USB-C charger?
03/10/2023 - 13:08
FTTP. I've also suggested ditching iiNet and perhaps doing ABB and opt in for the additional mesh AP's they offer. What do you think?
03/04/2023 - 16:36
My friend has just been shipped the TP-Link VX420-G2H wifi router from iiNet as part of his new internet service. He has an old, long,…
03/04/2023 - 15:53
Loading...