assailantsky » user profile

4 3
Member Since 29/07/2009
Last Seen 5 hours 48 min
Location Sydney

Recent Activities

Fingerprint reader is a must for these digital locks I think. You only need to try to key in a pin with two hands full of groceries once to...
04/08/2020 - 13:51
Easiest way is to call the 1300 number on officeworks website and ask for a price match. You can have the option of click and collect from...
24/07/2020 - 21:21
I think you've answered your own question. How did he get internet speed test on his PHONE of 92 mbps for his nbn IF his wifi bandwidth was...
21/07/2020 - 17:56
Don't see the relevance of ac1200 speeds in this context (100/40 NBN, with mw3 limited to 100mbps via WAN) Putting words in askme69's...
21/07/2020 - 16:49
I might be wrong, but I think he was referring to combined improvements for internet+wifi reception performance... and not absolute network...
21/07/2020 - 12:32
Officeworks PBG via phone! Thx OP.
21/07/2020 - 11:12
3x Large Kong Classics are $40.82 +delivery at Budgetpetproducts, so don't think 1 Kong with treats is worth $30.58....
16/07/2020 - 14:35
I had a read of those reviews and mho on some of the reviews: - some are reviewing about a different product - this product is bolted (with...
16/07/2020 - 14:26
Perma Child Safety Playpen Barrier - 6 Panels $99.89 @ Bunnings
Bought one from local Bunnings for a puppy and is of good quality, happy with it so far. It was the same price as the 3 panels door...
16/07/2020 - 13:06
Did you have the "smart assistant" on or off in the tenda app during the initial setup for Google devices? If on, this will force the setup...
12/07/2020 - 12:17
https://community.tp-link.com/en/home/stories/detail/960 This could be the difference between mesh and APs? Mesh's support for IEEE...
10/07/2020 - 00:14
"always above" means >=. I was indicating the minimum connection speed I got, and at that speed, my phone didn't decide to switch nodes. My...
09/07/2020 - 23:59
Maybe my phone or my small house, I don't see a switch even as I stand next to the new node. I guess I didn't trigger a rule of some sort....
09/07/2020 - 23:50
It says I'm connected to one of the two nodes (same ssid name), at 780mbps on the 5ghz band.
09/07/2020 - 22:39
There are two spectra (two units) on the same channel, both have the same ssid.
09/07/2020 - 21:05
Yah signal strength changes relatively as you move closer/further between each node. On the tenda app, it will show which node you are on....
09/07/2020 - 20:34
I think the idea of connecting the mw3 to a gigabit switch is just to make sure that any hardwired transfers (e.g. from pc to pc) will be...
09/07/2020 - 20:24
Same channel I assume for better roaming, but maybe mesh networks have built in smarts that separate APs don't have or use. Ps. Just...
09/07/2020 - 19:24
Two overlapping spectrum (one from each unit, I have 2 units total) is what's happening if I remember correctly.
09/07/2020 - 17:38
Yes, there's no physical difference between the mw3 units. Which one is acting as secondary or primary is purely software and where the WAN...
09/07/2020 - 17:34
Yes, on the primary node. On the secondary node I use the two ports as LAN for my non-wifi enabled PCs. Works fine for internet access.
09/07/2020 - 16:52
WiFi to wifi speeds will be faster than 100 mbps. The speed is only limited to 100 mbps anytime data goes thru the WAN and/or LAN...
09/07/2020 - 16:49
It has two LAN ports, with one of them being dual WAN/LAN.
09/07/2020 - 16:45
No, haven't try that. Lets see if I can remember to test tonight. Most likely the speed will be higher than 100 Mbps.
07/07/2020 - 14:36
excuse my lack of punctuation and wording... :) should read: "so at <=100 Mbps speeds as advertised, and not 1 Gbps. "
07/07/2020 - 09:59
Just tested by transferring a large ISO between the two PCs connected via ethernet cable to the same MW3, the transfer was happening at...
02/07/2020 - 19:15
No worries and good luck! I hope it works out, please do report back and let us know how it went? In the manual or app during setup (I...
01/07/2020 - 22:57
I think the ideal setup (when not getting Unifi gear) will be MW6 in each house and then 1 MW3 in each house as nodes. If the wifi extender...
01/07/2020 - 22:22