howdydood » user profile

1
Member Since 12/07/2017
Last Seen 10 hours 53 min
Location Sydney

Recent Activities

And this is his followup long-term review of the Osprey https://www.youtube.com/watch?v=oj2_AeqItZw
04/02/2021 - 21:47
I bought the Osprey a year ago based on this Youtube review - excellent bike with zero issues after riding for 7,000km...
04/02/2021 - 21:42
Sounds exactly the same as my Samsung - luckily the LG OLED in the media room doesn't have this issue ...
17/01/2021 - 17:26
"Dark room viewing is disappointing with the LED backlighting " What's the problem, LED light bleed? My Samsung has bad light bleed in each...
17/01/2021 - 15:54
I bought an Osprey in February, my experience is excellent service. I've ridden it 5,000km since then without a single problem other than...
26/11/2020 - 21:21
It's a good price, however I got a 58.5mm Nexus pro - the extra 1/2mm fits the portafilter perfectly so no grounds are left on the sides
04/11/2020 - 14:12
It's cheap for a reason, this is Shun's "entry level" knife and has one inner layer of VG10 steel sandwiched between a layer of stainless...
01/10/2020 - 09:18
Don't forget 2.8% Cashback ...
15/09/2020 - 08:46
Yes you're right - it's just a strange camera angle taken from under his chin looking up - I can see his eyelashes on the far left side and...
14/09/2020 - 13:05
The website photo has a larger photo which shows his eyes are covered, the lady model shows her eyes are not covered - why are his eyes...
14/09/2020 - 12:47
AMTM is "baked" into Merlin firmware - you access it by SSH into the router. The add blocking script is called Diversion, and one of the...
30/08/2020 - 20:01
Have you loaded the ad blocking scripts via AMTM? Well worth it - it even can block youtube ads ...
29/08/2020 - 22:11
It's just the recommended setup by Merlin himself - I run merlin on my nodes as I've enabled entware on them and I'm running snmp so I can...
29/08/2020 - 22:09
No, about a year or so ago Merlin didn't support Aimesh, however Merlin totally re-wrote the firmware and they all work with AiMesh now....
25/08/2020 - 20:47
All Asus router have USB tethering with Android phone or connect a USB 4G dongle - can be setup as fail-over, load balancing or manually...
25/08/2020 - 20:44
Yes thats right - the nodes can run either merlin or asus stock, however no benefits from merlin on a node
25/08/2020 - 20:40
https://www.asus.com/au/support/FAQ/1035087/
25/08/2020 - 13:21
Yes - you factory reset the one you want as a imesh node then add it from the main router - it's covered pretty well on the Asus webpage
25/08/2020 - 13:19
I'm running merlin on them all, however imesh will work fine using stock Asus .. in fact, merlin recommends running stock ASUS firmware on...
25/08/2020 - 13:16
Yes for sure - before i got a RT-AC86 I had 2 x RT-AC68U running iMesh perfectly
25/08/2020 - 13:13
Yes I have a RT-AC86U running Merlin as the main router with two RT-AC68U wired mesh nodes - all running Merlin without any issues at all...
25/08/2020 - 13:12
I had that issue with some of the first mesh firmware, how long since you tried? For at least a year though the new firmware has been rock...
25/08/2020 - 13:08
Why not get another Asus router and connect it as an iMesh Node? That's what I do, I have two RT-AC68Us - one as the main router and the...
23/08/2020 - 18:58
The UDM is a combined Router and Wireless Access point - your Unifi AP AC Pro is just a Wireless access point, it's not a router. Big...
31/07/2020 - 16:45
Does it interface with Home Assistant ?
29/07/2020 - 17:07
Reading the install instructions - you need to get a license number from this site however it seems to be offline:...
27/07/2020 - 20:26
How does the drop-tail hem that can be adjusted work? I didn't see that in the description? Is it like a bike jacket?
25/06/2020 - 19:41
Except they dont say the discount is off already discounted price ... it's inferred its an EXTRA 20% off meaning 20% off original price
25/06/2020 - 12:18
Chat just now with them: Chat started Customer Service Our online store is fully operational. Due to an increase in online orders some...
25/06/2020 - 12:12