ASA » user profile

Member Since 13/03/2012
Last Seen 20 hours 53 min
Badges 1 2
Location Sydney

Recent Activities

Yep. Supposedly can handle 64GB of DDR4 memory. I have 32 in mine.
24/05/2025 - 17:27
I have Plex on a different box but I have used Jellyfin on it with transcoding using the iGPU (Pretty sure I am going to move everything…
24/05/2025 - 17:24
They work great with Unraid. I have Unraid on mine and love it.
24/05/2025 - 17:16
This used to be the case but less so for the past couple years. I haven't tried it for Plex as I am using an old Intel HP for my plex…
22/05/2025 - 14:07
Truenas is very good but more complex to configure. It also uses ZFS. I was going to go TrueNAS on my recent NAS but played with Unraid…
22/05/2025 - 09:30
Hey! That's my NAS you're talking about! ;)
07/05/2025 - 08:58
Agree. About 3 minutes
07/05/2025 - 08:53
Thanks, will check for that! :) (I think I read somewhere that that option governs the minimum size rather than the max)
15/02/2025 - 20:13
Ordered a Longchamp shoulder tote as a present. It arrived and was basically evening purse size. If it was the same as pictured the lady…
15/02/2025 - 18:20
Anybody know why the BIOS reports only 19GB RAM when I have 32GB installed? Linux is saying there is 32GB there but only 19GB available. Is…
15/02/2025 - 17:45
Depends on your plans for it. Do you want to run VMs? Docker containers? If just using a NAS 16GB is probably fine. I put 32GB in mine. Non…
15/02/2025 - 17:41
Yes, and also beer, wine, whisky, ... ;) I get it :) I have an old Truenas on a very old HP N36L. Wanted to check out unraid so am on the…
15/02/2025 - 17:39
Got mine 2 days ago and playing with UNRAID. I was tossing between it and Proxmox (with unraid or truenas vm-ed)
15/02/2025 - 17:33
Not sure what blades they have on their panel saws but to get a nice cut (without chewing up the edge of the laminate) you generally use a…
12/02/2025 - 19:53
There is the Woodworkers Association of NSW in Abbotsford. You can use the workshop (after being given instruction on each machine) and…
12/02/2025 - 19:47
Hmmm, I had it in my head they were around $100. Still a lot cheaper than a Lie Nelson or Veritas :)
01/02/2025 - 15:24
Yep. Totally agree. The only thing this is good for is taking the blade out and giving it to your child/grandchild/etc to play pretend with…
01/02/2025 - 14:34
Yes, I tend to use PrusaSlicer; and you can do that, or scale models. But its a pain, and if you cut a model you have to somehow glue it…
19/01/2025 - 17:35
Very true. I, however for example, regret getting a Prusa mini only because I keep ending up wanting to print larger models - especially…
14/01/2025 - 11:13
Carbatec have them but $10 premium for no waiting. You can often get a 10% discount by asking... ymmv
23/12/2024 - 17:35
I have the Eureka Mignon Manuale. Obviously the Specialita is a bit higher end. My thoughts: * Everything everyone has said is correct :) *…
26/11/2024 - 11:33
By dual wall do you mean the pressurised basket? If so, then use that if you don't have a grinder and are buying pre-ground coffee. If you…
24/11/2024 - 16:37
I use pureau and make up Pavlis water using Potassium Bicarbonate (get it from a brewer's supply place). I make up about 4 litres in…
24/11/2024 - 14:52
Cask strength, so probably, yeah :)
19/11/2024 - 17:21
Hmm, I havent seen that in woolies but interesting. Its kinda similar price to the Pureau 10l casks. I'm not sure about the 1/1000…
06/11/2024 - 20:37
Loading...