This was posted 8 years 6 months 25 days ago, and might be an out-dated deal.

Related
  • expired

STANLEY 50 Piece Microtough Socket Set 1/4" 1/2" Drive $69 Delivered @ Supercheap Auto eBay

180
STANLEY 50 Piece Microtough Socket Set 1/4" 1/2" Drive $69 Delivered @ Supercheap Auto eBay
Go to Deal
Cashback
tightarse on 08/10/2015 - 15:07 groupbuy.ebay.com.au (1457 clicks)

Get your hands dirty with the Stanley Microtough 50 piece socket set. At only $69 delivered anywhere in Australia - working on the car couldn't be cheaper. Featuring 1/4 and 1/2 inch drive sockets, hex keys, screwdriver bits and torx bits - you'll be well equipped to tackle any task. Be quick, only 400 units available.

  • 1/4" and 1/2" drive
  • 5° angle of engagement
  • Fine 72-tooth gear
  • Thumb operated reverse switch
  • Comfortable bi material handle
  • Full ISO spec

STANLEY Microtough 50PCE Socket Set:

12 x 1/2 in Drive bi-hexagonal sockets 10, 11, 12, 13, 14, 15, 17, 19, 22, 24, 27 and 30mm.
1 x 1/2 in Drive bi-hexagonal spark plug socket 21mm.
1 x 1/2 in Drive universal joint.
2 x 1/2 in Drive extension bars125 and 250mm (5 and 10 in).
1 x 1/2 in Drive ratchet
10 x 1/4 in Drive hexagonal sockets 4, 5, 6, 7, 8, 9, 10, 11, 12 and13mm.
1 x 1/4 in Drive universal joint.
1 x 1/4 in Drive ratchet.
1 x 1/4 in Drive extension bar 75mm (3 in).
1 x 1/4 in Drive sliding T bar.
1 x 1/4 in Spinner.
1 x 1/4 in Bit holder 1/4 in.
2 x 1/4 Slotted bits 4.5 and 6mm.
2 x 1/4 Pozidriv bits PZ1 and PZ2.
2 x 1/4 Phillips bits PH1 and PH2.
4 x 1/4 Torx bits T15, T20, T25 and T30.
7 x 1/4 Hex wrenches 1.5, 2, 2.5, 3, 4, 5 and 6mm.

Automotive Socket Socket Set Tool

Related Stores

eBay Australia
eBay Australia
Marketplace
Supercheap Auto
Supercheap Auto

closed Comments

  • WatchNerd on 08/10/2015 - 15:09
    +4

    No code required? "Ratchetarse"

    • tightarse on 08/10/2015 - 15:11
      +5

      1/2"ARSE maybe lol?

      • NachoMafia on 08/10/2015 - 15:25
        +7

        A simple "tightarse" works well here.

  • yojabbajabba on 08/10/2015 - 15:19

    It says on the ad "Be quick, only 300 units available!" when there are actually 400.

    • tightarse on 08/10/2015 - 15:20

      Also look at the price in the description ($99). I'm guessing they copy/pasted from an old group deal.

  • GiggidyGoo on 08/10/2015 - 15:27
    +1

    Also available on SCA webpage TA. Same price. Link

    Also says 503 in stock.

    • tightarse on 08/10/2015 - 15:29

      Cheers. May be a good opportunity to use the $50 eBay vouchers though?

      • CVonC on 08/10/2015 - 16:16

        And cashback with eBay :)

  • T_double_U on 08/10/2015 - 15:34

    Cheap s**t or half decent for the money?

    • SteveAndBelle on 08/10/2015 - 15:43

      Stanley stuff is half decent ie. streets ahead of the SCA & ToolPro branded crud but not quite as good as genuine Sidchrome, Kincrome, KC etc… IMO of course plus it all depends on what you'll be using it for and how often too.

      • Matt P on 08/10/2015 - 19:59

        Ive got a few toolpro items and find them quite decent and well made. On par with my Stanley stuff.

        • SteveAndBelle on 08/10/2015 - 21:02

          Fair enough. My small ToolPro set only gets used for those messy, dirty non-critical jobs when I don't want to mess up my nice Sidchrome set :) Bought a few of those little, crazy priced K-Mart sets earlier in the year for the same reason. Maybe there are different grades of ToolPro but the stuff I own isn't much better than the K-Mart stuff TBH.

    • myclock on 08/10/2015 - 15:53

      Stanley I would say is of better quality. Will suit most home jobs fine. Have had a set for a few years now and still all good. I also have some SCA & ToolPro socket sets and I find they are good and they are always on sale.

    • maxwellian on 08/10/2015 - 15:57

      Doesn't matter… lifetime warranty.

      • SteveAndBelle on 08/10/2015 - 16:03
        +3

        Well it kinda does matter. Better quality tools usually have better tolerances and dont wear as easily as the cheaper stuff which means you wont end up with rounded bolt heads or mashed screws heads as much. The lifetime warranty is great but only covers the tools themselves, not the damage done to the screws, bolts, nuts etc. you're using them on and in a lot of applications (eg. automotive) that's absolutely critical! No problem unscrewing computer cases with a cheap ToolPro screwdriver but you wouldn't want to rebuild an engine with ToolPro tools. Probably OK with Stanley stuff though!

        • maxwellian on 08/10/2015 - 16:12
          +1

          Valid point, I've always exercised very strong caution on any stuck bolts (ie, if I see hint of slip I'll reassess rather than just banging on with what I have in hand) and have spent a lot of money on 'important' tools such as torque wrenches and the like but for 'consumables' like sockets I'm pretty easy going. I do prefer the 'hex' style sockets rather than the multi point for this reason tho.

        • SteveAndBelle on 08/10/2015 - 16:15
          +2

          @dewy: Too right… and ironically slipping tools on a bolt heat usually only happens just when you're finishing off a critical project after hours and on a day before a Public Holiday ;) Infuriating to say the least!

        • maxwellian on 08/10/2015 - 16:17
          +1

          @SteveAndBelle: I won't ask why you know if you don't ask why I can confirm ;)

    • T_double_U on 08/10/2015 - 16:28

      Thanks for your input guys, might just pull the trigger.

  • bamzero on 08/10/2015 - 16:13

    "Be quick, only 300 units available!" (from the eBay description)

    "DEAL IS ON - 65 bought, 335 left"

    Good math! :)

    Not a bad starter set for the price though..

  • glennh70 on 08/10/2015 - 16:50

    There seems to be over 500 at SuperCheap for the same price, might have to add postage cost, unless you pickup
    http://www.supercheapauto.com.au/online-store/products/Stanl…

  • Russ on 08/10/2015 - 18:46

    @SteveAndBelle:

    What ever happened to the "Metrinch" sockets, that look like a torx socket? They supposedly drive on the flats of the bolt head, making it almost impossible to damage the heads. They were popular a decade ago, were they just a gimmick?

    Example of what I'm talking about:
    http://au.element14.com/metrinch/met-1220/socket-1-2-drv-22-…

    • SteveAndBelle on 08/10/2015 - 19:42
      +1

      Yeah, not sure Russ. Whenever I've had to tackle a stubborn or rounded bolt head I've never had access to a set of Metrinch and have figured it out another way. Maybe someone else can chime in with their experience?

    • AMLagonda on 10/10/2015 - 01:04
      +1

      You can still get them, I bought the socket set and spanners 26 years ago :) Still as good as new and tough as anything.
      http://www.ebay.com.au/sch/i.html?_from=R40&_trksid=p2055119…

Login or Join to leave a comment
Login Join