This was posted 6 years 4 months 2 days ago, and might be an out-dated deal.

Related
  • expired

Ozito Power X Change 18V Compact Drill Driver Kit with 71 Accessories $69 (Was $119) @ Bunnings Warehouse

1040
Ozito Power X Change 18V Compact Drill Driver Kit with 71 Accessories $69 (Was $119) @ Bunnings Warehouse
Go to Deal
save50 on 23/12/2017 - 19:12 bunnings.com.au (6937 clicks)
Last edited 23/12/2017 - 19:13

Ozito Power X Change 18V Compact Drill Driver Kit with 71 Accessories
This Drill Driver Kit with 20 drill bits, magnetic bit holder and 50 driver bits will allow you to drill into timber or metal and drive various screws including phillips head, slotted, square, torx, tri-wing and clutch drive.

The 40NM of torque and 2 speed gearbox will help you power through your DIY tasks around the home and garden. Get straight to work with the included 1.5Ah Li-Ion battery and Fast Charger.

13mm single sleeve chuck
2 speed gearbox
71 Accessories and kitbox
Includes 1.5Ah Battery and fast charger

https://www.bunnings.com.au/ozito-power-x-change-18v-compact…

Home & Garden Drill Ozito Power Tool

Related Stores

Bunnings Warehouse
Bunnings Warehouse
Marketplace

closed Comments

  • firedragon on 23/12/2017 - 19:59
    +1

    Is this a good, general all round drill for doing simple jobs around the house? (I've never owned a drill).

    Thanks!

    • jamestownfx on 23/12/2017 - 20:01
      +4

      Yes

      • [Deactivated] on 23/12/2017 - 20:16
        -5

        Hold on, isn’t this a drill driver? It’s not for making holes, it’s for putting fixings into stuff.

        • geebee on 23/12/2017 - 20:34
          +5

          Serious?

          Its a drill with an adjustable torque settings for driving.

        • [Deactivated] on 23/12/2017 - 21:27
          -2

          @geebee: If what I said isn’t the case, why do drills often come in twin packs with both a driver and drill?

        • geebee on 23/12/2017 - 21:33
          +3

          @Burnertoasty:

          Because they come with a drill / driver and an impact driver which drives screw faster, easier, less breakages and can drive a larger screw or bolt, they are very nice, but not essential as a drill/driver can do most of the same work well enough.

        • garage sale on 24/12/2017 - 01:09
          +2

          i have an IMPACT driver and only use it on large and long screws into timber , impact drivers have anvils inside that pulse the action once friction becomes an issue.

          normal drill/ driver actually gives you more control on drive depth unless you have a variable torque impact driver and they are typically $200 - $300.

          this drill is good choice for DIY as it has the 18v charger so you can add other ozito stuff as you collection grows.
          eg bigger batteries and brushless tools.

          most of my stuff is makita so i’m sort of locked in but if they ever do a killer 4 ah battery deal again to compete with aldi i might get some ozito kit.

        • breadylonglegs on 24/12/2017 - 05:10
          +1

          @Burnertoasty:

          A cordless drill driver can function both as a drill and an electric screwdriver.

          Those drill and driver twin packs come with a drill driver, and an impact driver. An impact driver whacks on the screw rotationally until the screw is driven in. It has a different chuck (takes hex heads) and can't typically be used to drill things.

        • ColonialBoy on 26/12/2017 - 10:10
          +1

          @Burnertoasty:

          Because when you build stuff, you often have to drill a hole (using a standard drill bit) then put in a screw (using a screw bit). Since you do this all the time, and you need different bits, two drill is handy.

          I just have a 15yo GMC old drill driver and have to constantly change bits. It works but its a slow process.

          Cheap drills work fine for most homeowners. Where you may need a better drill is long holes (eg posts in a deck), large diameter holes, concrete, or doing things all day where light weight counts. 240V drills are still around.

      • pinkybrain on 24/12/2017 - 00:00

        are aldi workzone drills better quality?

        • fredk1000 on 24/12/2017 - 00:13
          +1

          Cannot comment on quality.

          But Ozito you get 5yr warranty on the drill and 3yrs on the battery.

        • garage sale on 24/12/2017 - 01:11
          +1

          make by same company if you stick with the 18v lithium though bunnings warranty you can get replacement …. aldi would be refund as their specials come and go and then you have no drill.

        • phor8 on 24/12/2017 - 06:41

          The one I got from ALDI is less volts but seems otherwise identical but with hammer function and was $49 with 5yr warranty and 2 batteries

        • troyww on 24/12/2017 - 14:46

          @fredk1000: And the Warranty is quite fuss free . Take the item to bunnings and they swap it over there and then .

        • ColonialBoy on 26/12/2017 - 10:13

          Aldi are OK for the price. The issue is there have been different battery sizes, and you can't just go out and buy a higher capacity battery or other addon. The 240V stuff is good for the price.

          Down the track you might think you want a small vacuum or phone charger or charging the battery in your car or camping light. This is where ozito, ryobi and makita have the advantage.

    • Leichhardt on 24/12/2017 - 00:08
      +1

      Yes.
      I hung all curtain rods and blinds in our two story wooden frame house.

      Setup a theatre room with projector screen mounts, heavy duty speaker mounts.

      Drilled hundreds of screws for the aluminium slat fence, and they were drilled into 4mm thick steel posts - it wasn't butter soft, but the torque was good enough.

      2Ah battery lasted a full day of screwing, phew!

  • geebee on 23/12/2017 - 20:04
    +1

    "Is this a good, general all round drill for doing simple jobs around the house? (I've never owned a drill).

    Thanks!"

    Yep, exactly what it is designed for, plus comes with all the essential starter bits, looks like it is usually $99 without case or accessories.

    • ozb9user on 23/12/2017 - 21:09
      +4

      The Ozito Power X Change range is just rebranded Einhell from europe, perhaps you should try it before shtting on it?

    • LJH23 on 23/12/2017 - 21:31

      And you clearly have no (profanity) idea

    • ESEMCE on 23/12/2017 - 22:31
      +3

      Yeah, my "Ozshito" 18V drill died last weekend, it was "only" 10 years old too.
      Original batteries stillstill good for around 20 minutes each.
      Bloody keyless chuck has jammed somehow, otherwise everything else is fine.
      It probably only had a handful of uses per year, but that's all I needed.

  • Sabrex on 23/12/2017 - 21:25

    Sorry for stupid question does this go through plaster/concrete well? Or do I need a hammer drill?

    • z28 on 23/12/2017 - 21:27
      +4

      Plaster - No worry
      Concrete - No way

      • Sabrex on 23/12/2017 - 21:51
        -1

        Sorry I meant plaster and bricks

        • ESEMCE on 23/12/2017 - 22:32
          +1

          You'll need a hammer drill for brick.

        • ddd on 23/12/2017 - 22:47

          Yes it will work with bricks. However it will be tougher to drill and shorten the life of your masonry bits.
          For the odd job here and there it will be fine.

        • Sabrex on 23/12/2017 - 23:01

          @ddd: thank you!

        • ywpn on 24/12/2017 - 02:13
          +1

          @ddd: no it won't - definitely need a hammer drill

    • Mr Mrrtn on 23/12/2017 - 23:30

      for concrete/brick work I'd recommend an earlier deal $188 shipped DeWalt hammer drill, just got mine in the mail after ordering last week.

      https://sydneytools.com.au/dewalt-dcd796t1-xe-18v-6-0ah-li-i…

      If you need something sooner, Bunnings have the AEG brushless hammer drill with 6.0A battery for $199

      Sure, its not $69, but you're getting some serious gear in return

      • Sabrex on 24/12/2017 - 00:22

        Thank you! Just wondering is there any reason you would need a normal driver if you get a hammer driver? Cheers
        Also, what drill set would you recommend to go with the drill?

        • gdiddy7 on 24/12/2017 - 07:18
          +2

          Hammer Drills are much heavier and bulkier to use, you’d only need to use them with concrete or brick. You can use them for wood and plasterboard but if you’re doing a lot of holes you’re arms would get really tired. Plus hammer drill you wouldn’t use to screw with so you’d need a normal drill anyway. Hope that makes sense.

        • dufflover on 24/12/2017 - 10:31

          @gdiddy7: > Plus hammer drill you wouldn’t use to screw with so you’d need a normal drill anyway.

          Hammer drills can be put into "normal" drill/driver modes.
          (The AEG one anyway)

        • Sabrex on 24/12/2017 - 13:47

          @gdiddy7: thanks!

        • gdiddy7 on 24/12/2017 - 13:52

          @dufflover: sorry I was just generalising

        • Mr Mrrtn on 24/12/2017 - 15:50

          Hammer drill is basically your standard driver plus the hammer function, it also has more grunt. So anything you can do with a standard driver you can do with this. These are also brushless, which should indicate better quality and lifespan, but as mentioned below, it's sometimes lucky dip as to how long your drill is going to last. In regards to the weight, sure they're a little heavier, but not heaps. The most weight sits in the 6.0a battery which is chunky. If it's a problem just put it on ebay as they sell for around $140/150 and get a 1.5 or 2.0A for under $100 and they weigh much less.

      • ColonialBoy on 24/12/2017 - 07:19

        That looks like a good deal. I've got an old GMC drill that still works fine, but I can see the need for a major upgrade as my projects become more ambitious.

      • wfdTamar on 24/12/2017 - 07:45

        Just bought the top of the range AEG drill & impact driver kit for just over $600 after nearly setting the entry level driver on fire (gut's melted and smoke pouring out the back). The new drill stopped working after 5 screws, then started working next day, but temperamentally. Seems ok now but not a good start. I've got plenty of other AEG cordless orange, and going back to when they were blue - all fine, so I was not impressed by this. Particularly as it is at the top of the price range - higher than Bosch Blue now.

        Best thing for concrete is SDS bits & drill - far better than a standard hammer drill.

  • redpen on 23/12/2017 - 21:46

    Tried a few Vic stores and could only 'add to wish list', unfortunately.

    • xev on 23/12/2017 - 21:52

      If you set your local store on the Bunnings website then each item will show wether it is in stock there,
      If it is out of stock then there is a link to 'Check more stores' which will show where it is in stock at other stores.

      • PJC on 23/12/2017 - 22:08
        +1

        I don't see that. Instead, I see "Not all products available in all stores"

        • CountDuckula on 23/12/2017 - 22:09

          Same here.

        • xev on 23/12/2017 - 22:17

          At the top of the page (for me) it States my local store, its address and opening hours and a link to change store.

          Under the price it says In Stock at my local and a link to 'Check more stores'

          I can't remember where to do it, but if you set your local store for the website it should shows this for you as well.

        • PJC on 23/12/2017 - 22:22

          @xev:

          At the top of the page (for me) it shows States my local store, its address and opening hours and a link to change store.

          I've had that set for a year.

          Under the price it says In Stock at my local and a link to 'Check more stores'

          Not for me.

        • xev on 23/12/2017 - 22:23

          Are you looking on your phone or on a PC/Laptop?

          I am on a PC using Firefox

        • save50 on 23/12/2017 - 22:30
          +2

          Not all products available in all stores, but as long as you may add it into your wishlist, which means it is available from this store. (otherwise it will not let you to add into it)

        • PJC on 23/12/2017 - 22:44

          @xev: PC using Firefox Quantum.

        • xev on 23/12/2017 - 23:02
          +1

          Same as me, I don't know why it is showing for me and not for you, unless maybe you have sites blocked from knowing your location?

          I tried using Chrome and my phone and they both show where it is in stock for me.

          Sorry Mate

  • EVA-01 on 23/12/2017 - 22:08
    +1

    is it good enough for loosening nuts when changing tyres?

    • ozb9user on 23/12/2017 - 22:19
      +1

      It won't break them loose if they're done up correctly. But after you break them loose, put it on 2nd gear and the come off quickly.

      • garage sale on 24/12/2017 - 01:17
        +1

        you need wheel brace to break the nuts loose and the use drill driver so you don’t need to finger tighten

        they have special impact drivers for wheel nuts and other heavy duty tightening / loosening jobs.

    • AMLagonda on 23/12/2017 - 23:49
      +1

      No

    • [Deactivated] on 24/12/2017 - 06:34
      +1

      No, for that purpose you need impact wrench.

    • wfdTamar on 24/12/2017 - 07:47
      +1

      This is the type of thing for wheels - $199

      https://www.bunnings.com.au/ozito-power-x-change-18v-brushle…

      Best thing for that:

      http://www.supercheapauto.com.au/Product/Toledo-Wheel-Wrench…

    • ColonialBoy on 26/12/2017 - 10:46

      For taking tyres off random cars and trucks, you need an impact wrench.

      If we are taking about a car, my tip is to remove tyre (hopefully with little trouble), apply WD40 on nuts & rim, reattach type. Repeat X4. Tyre will be easy to remove for at least 2 years.

      Check pressure including spare tyre. Do all this before a big journey.

  • CountDuckula on 23/12/2017 - 22:12

    Doesn't seem to be stock anywhere in WA. Can only 'add to wish list'.

    • ozb9user on 23/12/2017 - 22:20
      +1

      I don't think you can buy anything on bunnings website, you have to go instore.

    • save50 on 23/12/2017 - 22:25

      You cannot buy it from online, have to go to the shops.
      You only can add it into the wishlist online.
      You may type the postcode to the area which indicates you to change the store (right hand side at the top), if you may add it into the wishlist (this means this store has the same item for sale at the same price). To secure the item, you have to ring bunnings to reserve it for you.

  • dufflover on 23/12/2017 - 22:20

    Another Ozito deal on? hmm might pop in tomorrow to see if any of the tools I might actually get happen to be on special …

  • AaronL on 23/12/2017 - 22:45

    Will this start my edger that has a broken rope pull / recoil mechanism?

  • demiurge on 23/12/2017 - 22:56
    +1

    I wish I could get just the drill. The quick charger and battery already came with the trimmer and blower I got this morning.

    • xev on 23/12/2017 - 23:03
      +2

      You can get the drill driver (skin only) for $39

      https://www.bunnings.com.au/ozito-power-x-change-18v-drill-d…

      But it is worth paying the extra $30 for an extra battery

    • PJC on 23/12/2017 - 23:15

      Bear in mind that battery you got this morning is 3.0Ah and the one in [this kit]https://www.bunnings.com.au/ozito-power-x-change-18v-compact-drill-driver-kit-with-71-accessories_p6290611 is only 1.5Ah.

  • ozf1 on 23/12/2017 - 22:56

    Sold out at Caroline Springs. Vic 3023.

  • AMLagonda on 23/12/2017 - 23:52

    Great buy if you haven't got a cordless drill already, but not that great for me, I was tempted cause it was so cheap but with no hammer function it seems so so….

    Go for it you you need a drill :)

  • Lancerx on 24/12/2017 - 02:00

    Got the money to buy but no skill to use it… Meh..

  • smuggler on 24/12/2017 - 09:16

    Which hammer drill to buy?

    Bosch, Makita, Ryobi or Dewalt?

    $200 budget and I want brushless.

    • wfdTamar on 24/12/2017 - 10:35

      Almost all brands have a range of quality. For example the former trade favourite Makita now has cheaper tools. I did favour AEG as great bang for buck, but I've had a couple fail recently and they're becoming to expensive for their boots. I'd say for average handy use Ryobi. For serious handy to light trade, I'd tend towards Bosch Blue. Bosch green are nothing special.

    • Toretto on 24/12/2017 - 10:40

      Youre in luck - this has been a fan favorite cracking deal since Black Friday

      https://sydneytools.com.au/dewalt-dcd796t1-xe-18v-6-0ah-li-i…

      • smuggler on 24/12/2017 - 10:45

        Can you recommend me a drill bit set to go with that drill? Using the drill for concrete, tiles, wood and my rock hard walls.

        • garage sale on 24/12/2017 - 11:48

          if you are doing a fair bit of concrete, bricks or rocks get a rotary hammer drill and run off 240V.

          Rotary hammer has completely different action to the impulse hammer drills, faster, bits last longer and don't overheat the bits.

          Cordless rotary hammer is about $260 just for the skin and you need big batteries hence go 240V.

    • garage sale on 24/12/2017 - 11:43

      Dewalt if you can get the current bundle with 6ahr battery, their tools are 18v/54v so they are already seeling batteris for their next gen tools and they are backward compatible, other make you add 2 batteries for 36V, great starter kit the dewalt, bunnings sold out but some places still have some, Bosch as their battery have vert little smarts so cheaper for aftermarket batteries.

      I have Makita ….. nothing special, no cheaper than bosch or dewalt but they do have lots of skins.

  • DiscoJango on 24/12/2017 - 10:00
    +1

    retailers really need to put in a much better effort to get their online stock level quotes correct. gone are the days where people went to the stores and spent hours aimlessly wondering around until they found what they after. i want to go online, find out exactly which closest store to me has the product, drive there, go to the exact isle its located in, purchase it and leave.

    it is these same antiquated retailers who cry the loudest when the likes of amazon and aldi come and take over. get with the times or get left behind.

    • garage sale on 24/12/2017 - 11:52

      by the time you drive there the stock might have been sold, so click n collect is only option and that is still store specific …. or ring store and ask to reserve for a day or 2.

      looking at how quick some of these deals move unless it's reserved by the time you get there stock is gone….

      Ring your bunnings store, they will check exact stock levels and call a store to reserve.

  • backslashio on 24/12/2017 - 14:17

    Much better than buying everything separately! Bought this 2 years ago and returned it because it was messy to store (separate drill bits/charger) and then had to buy a tool bag to put it in. I returned it all shortly afterwards as I didn't have much use for it. Bought it again today because it was so much cheaper & a great all in one kit!

  • Ronson on 24/12/2017 - 14:53

    Following stores out of stock -
    Hawthorn
    Box Hill
    Collingwood
    Northland

  • ywpn on 24/12/2017 - 15:47

    $99 at Vermont South

    • xev on 24/12/2017 - 17:00
      +2

      you should have asked them if they price match here own website and enjoyed an extra 10% off.

      PS. meetspin, I understood that reference… I have been to some dark places online

      A warning to others, don't google meatspin (NSFW)… Just don't do it

      PPS. I warned ya, you only have yourself to blame

      • ywpn on 24/12/2017 - 18:31
        +1

        "you should have asked them if they price match here own website and enjoyed an extra 10% off."
        loooool

    • Mainsail on 24/12/2017 - 23:48
      +1

      The $99 drill does look the same, but is a different product, without the added drill bits. I.e. if you can find this deal you're getting more for less.

      Not available at Wagga Wagga.

  • AussieDaddy on 25/12/2017 - 06:19

    A lot of stores in Adelaide are showing in stock. Will try to get one on Boxing Day.

  • BlitzKing on 31/12/2017 - 21:41

    Went to the new Windsor Gardens store in SA today. They just brought down 16 from topstock if anybody is still looking for one.

  • InternetExplorer on 14/01/2018 - 18:56
    +1

    About 5 available in the tool shop at Box hill. Went to buy the impact driver skin and a kit of drill bits because 2 hours ago when I called the store they said its not available. But when I walked in I saw multiples of these on the floor.

    • phaol7ta on 15/01/2018 - 11:17

      thanks mate, managed to pick up the last one in VIC, for $69. the gentleman that served me simply amaze and cant say anything..

Login or Join to leave a comment
Login Join