This was posted 6 years 1 month 19 days ago, and might be an out-dated deal.

Related
  • expired

Cocoon Create Touch 3D Printer from ALDI Now $399 (Was $499)

210
Cocoon Create Touch 3D Printer from ALDI Now $399 (Was $499)
View Image
Lstealth007 on 01/03/2018 - 01:05 files.ozbargain.com.au (1005 clicks)
Last edited 02/03/2018 - 23:51 by 1 other user

Hi all,
Long time reader first time poster but just wanted to share the awesome Concoon 3d Touch at Aldi is now $399 instead of $499. I picked it up today at Aldi Adelaide Airport. I know Marion also had some. Adelaide airport also advised they will be getting additional stock as well in the next week or two.

Printer is from:
https://www.cocooncreate.com.au/

Built in touchscreen for menu operation
Heated bed and 200 x 200 x 180mm print area
Can print your designs directly from an SD card.

This is a actually a re branded Wanhao i3 Plus but with all the issues fixed eg the shorting out of the heated print plate (nylon insulators installed) and local stock and already pre assembled compared to Chinese overseas kits. Above all local warranty with Aldi and 60 day satisfaction guarantee

enjoy all :)

****Updated picture with date despite it showing serial number

Electrical & Electronics 3D Printer Cocoon

Related Stores

ALDI
ALDI

closed Comments

  • burkey on 01/03/2018 - 01:14
    +2

    Good little printer there - but stock at my local stores sold out quite fast, so I think you'll be hard pressed to find these guys. Definitely a good price if you can though.

    • ryang on 01/03/2018 - 07:40

      Yep, even rang head office to check stock, nothing local at all…

      • robop72 on 01/03/2018 - 09:08

        @ryang which state? Looking for stock in Melbourne

        • ryang on 01/03/2018 - 13:05

          All outer eastern Melbourne stores were out of stock when I rang 2 weeks ago.

  • gunslinger on 01/03/2018 - 07:11
    +2

    Would this be better quality prints than say a Creality CR10?

    • burkey on 01/03/2018 - 07:51
      +1

      Mostly comes down to time and patience in the tuning of your own settings.

      If you have the budget and are definitely keen on 3D printing as a hobby, go a CR-10s, you won't regret it.

      But if you're after something 'cheaper' just to tinker, this one is a good price, as they also have a local Australian reseller that offers warranty and support.

    • sn809 on 01/03/2018 - 13:17

      You should get the Creality CR10s. s representing an upgrade. It has a lot of support on thingiverse and other 3d printing websites.
      Another one to consider is the Tevo tornado which I have. go through some on line reviews and see which you like.
      Each has their benefits

  • CaffeinatedTech on 01/03/2018 - 07:49
    +5

    Damn it, I thought this site was supposed to help me save money.

    Now I have to come up with some 'reasons' I need a 3D printer.

    • Ryanek on 01/03/2018 - 08:08
      +4

      You can print more money.

  • klaw81 on 01/03/2018 - 08:08

    It's a great machine for that price, considering how little work it takes to have it up and printing.

  • Crocfreefree on 01/03/2018 - 10:03

    Just beware even if there is stock still around, I think Aldi discounts are up to the local manager's discretion, unlike say Kmart where they'd be fed in the computer and nationwide.

    For instance, I've seen solar panels marked at Aldi Hurstville for $299, where just one train stop away at Aldi Kogarah they were $199.

    Incidentally, Aldi Kogarah is the best place to try if you've missed a special from 4 weeks ago: stock seems to stick around much longer. They might even be where unsold stock from other stores gets sent to, possibly because they have the floorspace.

  • CaffeinatedTech on 01/03/2018 - 11:14

    Yeah $449 at Marsden.

    • stealth007 on 01/03/2018 - 11:21

      Did they adjust it to the same price? Both Marion and airport in SA had them for 399 as the ticket price

      • CaffeinatedTech on 01/03/2018 - 11:33
        +1

        I didn't get one. They did it when the Xbox One S was on clearance too. They were higher price for a couple of weeks. That store seems to be happy to sit on stock for a long time. There's another store about 15 mins away, I might give them a call. Actually there's seven Aldi stores within about 20 mins of me by the looks.

        —edit— Can't find the phone numbers…

        • stealth007 on 01/03/2018 - 12:06

          yeah aldi stores dont have phone numbers to call them :( and when they call you they always call from blocked numbers and wont give it out :(

  • AndrewWOz on 01/03/2018 - 14:43

    Local store wouldn't match on this receipt as it didn't have a date showing :( Did it for $449 though.

  • CaffeinatedTech on 01/03/2018 - 16:52
    +1

    My wife just checked Booval. $449.

  • bamzero on 02/03/2018 - 02:56

    Hey OP, any chance of sharing another shot of the receipt that includes the date?

    • stealth007 on 02/03/2018 - 23:55
      +2

      As requested

      ****Updated picture with date despite it showing serial number

  • bamzero on 06/03/2018 - 15:29

    Thanks OP, just picked up the last one from my local Aldi.

    Was still priced at $499 and was about to try and negotiate a price, receipt photo ready to go on my phone, when they slapped a $399 tag on it before I got the chance.

    Picked up the last two rolls of filament they had too at $30 each (not sure if that's a particularly good price or not, found some cheap stuff on gumtree, ie anyone used the stuff from these guys, selling for $20 a roll on gumtree. Or are you just asking for trouble with really cheap filament?)

    • rski on 06/03/2018 - 16:02

      What store did you buy it from for $399? The only stores I've seen them at are $449.

      • bamzero on 06/03/2018 - 16:17

        Gateways (in WA)

        Maybe worth checking again, yours may have dropped price again if they still have stock.

        • rski on 06/03/2018 - 17:07
          +1

          Ok nowhere near me (VIC). Yea I check every few days. They'll have to reduce them again eventually. :)

        • ryang on 08/03/2018 - 09:05

          @rski: where in Vic? I'll buy for $449… 😀

        • rski on 08/03/2018 - 15:11
          +1

          @ryang: Some stores west side of Melbourne around Mooney Ponds had some.

        • ryang on 08/03/2018 - 15:56

          @rski: Bugger, bit too far for me. Thanks anyway!

  • quikstix on 07/03/2018 - 14:40

    yea everywhere i see says 449 and wont budge down to 399 :(

  • Nitrogen on 02/04/2018 - 18:48

    These are still around and priced at $399. I just picked one up today at Ashgrove, QLD, and there are multiple units left.

Login or Join to leave a comment
Login Join