Cheap Paint deal had bought a few of them. Seem to do their job. After all only 3 bucks for a 250 g can.
Dont know the expiry date.
My recommendation, Silver looks great
Can says "Not for automotive use"
Motortech Enamel Paints/Primer/Clear- 4 for $12 @ Repco
140
USER DC on 17/05/2020 - 01:21 repco.com.au (824 clicks)
Last edited 17/05/2020 - 11:28 by 1 other user
Last edited 17/05/2020 - 11:28 by 1 other user
Related Stores
closed Comments
Updated thanks for that
Great on other ppls exterior walls?
Id say you'll need to make sure you get no water on paint (8 hrs or something) if you can't manage it it will leave paint marks on hand
Says 250g not 350g
How do these paints compare to the export paints normally sold at Supercheap auto for $10 for 4 cans?
These are much better than Export.
Depending on Age, ppg or rustoleum own it. Afaik
Nice one. Export paints are really crap… But oh so cheap.
Will check out these ones
These are not too bad but take ages to dry and yo you'll need to prep surface before applying that is sand properly
Well played… I bought the cans and compared them to my export paints… Same manufacturers.. MMP.
Likely the same crap with a different label.Colour palette is the same.
Sorry ihave corrected it
Sca s deal 4 for 10 is over i think
Could you use these for this project?
https://www.supercheapauto.com.au/blog/how-to/paint-and-body…
No. Well, you could, look up "rustoleum paint job" on YouTube, but its not technically the right paint.
I was tempted to use this for my car too and at the end the color doesn't end up too bad on other objects like tools etc.
But i didn't use it on my car silver can and my car were totally different looking.I probably would buy a cheap base coat and spray like 2 coats of it and then 2k clear coat
Make sure to use a 2k clear coat for longer lasting paint job you can get one from Autobarn or if cheaper from eBay.
I'm confused. If I had some spot rust on my Ute chassis could I use this stuff? Obviously prime first etc.
Cheers
Can't add to cart anyway.
It's usually 4 for $10 quite often at Supercheap auto too.
You need to sand and remove all the rust first. Use rust converter.
Clean, prime, paint. Won't look great, but surely better than the rust spots.
Yeah definitely prep first but is this grade of paint "any" good for that sort of thing?
Obviously it wont be like Rustoleum. Just seems too cheap!
It'll be ok. Prep is key.
Don't forget store in title 😉