• expired

Flsun Super Racer (SR) 3D Printer (with AU Plug) A$565 / US$429 Delivered @ Madethebest



(1)Print size: 260mmX330mm.The size of the 3d printer in a wide range of audience groups keen on the size of the region, to meet the needs of a wide range of audience groups.
(2)Full-color capacitive touch screen, equipped with retractable cable and movable touch screen stand, the experience is more humane, more convenient and comfortable to use.
(3)Three-axis linkage, printing speed is 2-3 times the market I3 results, the same model, in the same precision and surface quality, can be reduced by half the time, which is the main selling point of the machine.
(4)With broken material detection,power failure renewal function.
(5)32-bit motherboard processor, more stable, more efficient, control the motor ground drive module for TMC2209 silent drive, silent effect belongs to the top level of desktop-level printers.
(6)Effector module installation: double turbo fan + 4010 ordinary fan a total of 3 fans, heat dissipation blowing effect is very good.
(7)The motion guide is industrial grade wire gauge to ensure more accurate and stable printing.
(8)Automatic leveling system, one key leveling, permanent memory.
(9)Crystal lattice glass hot bed, heating the hot bed during printing, the model can stick to the platform better, after printing is over and the hot bed cools down, it is easier to take off the model.
(10)Double-gear BMG extruder, more torque, stronger extrusion, more stable and more durable.
(11)3K high-strength carbon fiber parallel arm, more effective to ensure the accuracy of the movement, stability.
(12)Modular assembly, customers only need 10-15 minutes to complete the assembly experience.
(13)The machine is equipped with parts box, commonly used parts can be stored in the parts box, more humane, more comfortable service.
(14)High strength customized aluminum side plate, can ensure that the machine in the process of high-speed printing, to maintain a stable body.
(15)The belt is 10mm high abrasion resistance belt, to ensure the customer in the 3d printer high-speed movement state of long-term use.

Review videos:

My NEW FAVORITE 3D printer - FLSUN Super Racer
Fastest Sub $500 3d Printer? The Flsun SR Super Racer Is A Beast!

Related Stores

Made The Best
Made The Best

closed Comments


    I have one of these. Its fast - but sorting out some print issues.


      Hi, feel free to contact me if you need any help from my team.


        Thanks - I think I got it sorted.
        Tuned the 3 rubber belt tension using Pano Tuner app, and did a hotend and bed PID tune (had to enable Bed PID and recompile the firmware).

        Any suggestions for reducing Ghosting ? Other than slowing way down, or installing Klipper with input shaping..

        I print at fairly conservative speeds (well below its max):
        - Print speed = 80 mm/s
        - Infill speed = 100 mm/s
        - Outer wall = 50 mm/s
        - Inner wall = 90 mm/s
        - Top/Bottom = 50 mm/s
        - Travel = 120 mm/s


          Hello ,can you PM me the picture or video of your problems. I will forward it to the Flsun team to offer you some suggestions.