This was posted 2 years 1 day ago, and might be an out-dated deal.

Related
  • expired

meross Smart Garage Opener (HomeKit Version) $57.36 Delivered @ meross direct via Amazon AU

530
meross Smart Garage Opener (HomeKit Version) $57.36 Delivered @ meross direct via Amazon AUAffiliate
Go to Deal
Cashback
vellatino on 25/04/2022 - 06:08 amazon.com.au (2131 clicks)
Last edited 05/05/2022 - 05:04 by 1 other user
This post contains affiliate links. OzBargain might earn commissions when you click through and make purchases. Please see this page for more information.

On Special. Is cheaper than the last deal by $1.29.
Enjoy.
Compatibility manual.

  • Remote and Voice Control: You can turn garage door on/off from anywhere with internet via the Meross app. Or control your devices hands free, just give voice commands to turn on/off the connected devices. Compatible with Apple HomeKit, Siri, Amazon Alexa, SmartThings and Google Assistant. To let in your family, guests or couriers through the garage door while you are cooking or not at home. No monthly fee or any other subscription fee!
  • Compatibility Check: Please check if your garage door model is in the compatibility list on meross /'mɪrɚs/ official web. Also you can contact us to confirm the compatibility.
  • Multiple Notification Modes: Stay alert by different notification modes such as garage door open/ close status, overtime notification and overnight notification to remind you close the garage door. And you can check the garage door open/ close operation records through the APP.
  • More Precise and Stable: It comes with a high sensitivity sensor which monitors the status of garage door more accurate and the signal stays stable. With adapter convert 220v to 5v, much safer.
  • Easy to Install: Installation is much easier than you may think. Pls make sure your wifi strength is acceptable near your garage door. This is the upgraded version, which has solved the interference issues our old verion may cause to some garage door remotes. If you still find it interference with your original garage door remotes, please contact [email protected] for help. We have a solution for you.
Price History at C CamelCamelCamel.
Electrical & Electronics Garage Door Controller meross

Related Stores

Amazon AU
Amazon AU
Marketplace
meross
meross

closed Comments

  • SpeedMeades on 25/04/2022 - 07:05

    Bought one as I’ve always wanted to be able to use y car or phone to sense when I’m arriving home and open garage automatically. Any security issues I should be aware of with people getting their garage doors opened when they’re not home?

    • vellatino on 25/04/2022 - 07:19

      I have a security camera that’s HomeKit enabled so for any reason the door is opened and I’m concerned I can always check the camera for piece of mind.

    • Elpres on 25/04/2022 - 07:58

      These require an authenticated device, something with a pin or such. I can operate using my iphone or apple watch but not my homepod mini.
      We went away for a week and as long as you don’t push the button or tell voice assistant to open it should stay closed.
      It is also set up to notify me when the door opens or closes, or if it’s remained open for longer than a specified time.

  • hopper on 25/04/2022 - 07:35

    Mine keeps saying its offline and the light turns red, but works from the app not from google assist properly

  • sini180 on 25/04/2022 - 08:25

    Is there any difference in this and the non-home kit version? I use home assistant. No apple devices in the house so no need for home kit support. This days it is the upgraded version. Thanks.

    • guidedlight on 25/04/2022 - 09:03
      +2

      No difference. HomeKit uses a proprietary Apple chip, which is the only reason it is more expensive.

      Also use HomeKit, you need a HomeKit home hub, which means you must own at least one of HomePod, Apple TV, or an iPad (which is permanently connected to power). So you would need to be pretty deep in the Apple ecosystem to consider getting a HomeKit device.

      • sanow on 25/04/2022 - 10:19

        the product tittle says no hub needed. not sure if it is missleading

        • [Deactivated] on 25/04/2022 - 14:28

          Technically not misleading as the hubs are either: iPad, HomePod or Apple TV. Primary purposes of these is not a hub so they can get away with it.

      • Smigit on 25/04/2022 - 14:41
        +1

        HomeKit stopped needing a chip in around 2018. Article from the 2017 WWDC keynote, but from memory the change came into effect around March/April the following year.

        https://www.theverge.com/2017/6/8/15761800/apple-homekit-upd…

        Apple is also making one other big change to simplify development: it's no longer requiring that every HomeKit device contain a specific security chip. Instead, it'll allow companies to authenticate their devices entirely using software. Smart home devices out on that market that don’t already support HomeKit will even be able to use this method to add HomeKit support after iOS 11 launches this fall.

        • [Deactivated] on 25/04/2022 - 15:17

          Typically the extra cost is associated with overheads of platform maintenance (Apple Developer Program cost) and stringent changes that manufacturers and developers need to adhere to.

    • Hargain Bunter on 25/04/2022 - 15:30
      +1

      The HomeKit version can be added to Home Assistant through the HomeKit Controller integration. The non-HomeKit version would need a custom Meross integration through HACS.

  • Niroshansira on 25/04/2022 - 08:44
    +4

    Non homekit version 44.60
    Free Delivery with Prime

    Deal of the day: Smart Garage Door Opener Remote, APP Control, Compatible with Alexa, Google Assistant and SmartThings, Multiple Notification Modes, No Hub Needed by meross https://www.amazon.com.au/dp/B07QCTN71J/ref=cm_sw_r_apan_i_d…

    • search on 26/04/2022 - 08:03

      Thanks @Niroshansira. I ordered one for myself but could not order another for a friend. Amazon has limited this to one per customer. Not sure why?
      I wonder if I can make a second order.

  • muddrex on 25/04/2022 - 08:59
    +3

    I have this for over 2 years already and it's been great.

    One piece of suggestion (thanks to another OzBargainer) is that you want to set the time out to more than 30s (default setting) in the Meross app as otherwise there's a chance that it would time out and Home would think the door is still opening/closing because it takes more than 30s to close/open your garage door.

  • mlakmlak on 25/04/2022 - 09:08
    +4

    I've installed a couple of these on panel sectioned doors & needed to support the 'close sensor cable' along the chain guard back to the motor - which sites in the middle of the garage.
    I found these type of cable clips make it easy, neat & tidy.

  • kiwizz on 25/04/2022 - 09:20

    Any way to flash these with something like tasmotizer or esphome?

  • Vote for Pedro on 25/04/2022 - 09:56

    Great product. Love it. Depending on you garage door opener, you might need to get creative with the sensor placement but thats no fault of the product.

  • theSav on 25/04/2022 - 09:56

    Has anyone set this up with Home Assistant? Any tips?

    • Willba5 on 25/04/2022 - 11:52
      +1

      Yes, it works with home assistant. You need to install Meross integration through HACS. I've installed the Meross LAN version and haven't had an issue for over 12 months

      • theSav on 25/04/2022 - 12:06

        awesome, thanks, i assume it's just an open/close control?

        • Willba5 on 25/04/2022 - 12:44
          +1

          Yes, these only have a sensor on the closed part of your door so you set a time to show it opening for 10-15 seconds, then it shows as open. I just recently removed my Meross opener and build my own version in esphome as I have two garage doors and wanted a sensor on both open and closed

    • Hargain Bunter on 25/04/2022 - 15:33

      I have the HomeKit version connected to Home Assistant through the HomeKit Controller integration and it works well.

  • YELNATS on 25/04/2022 - 10:42

    Bought the non home kit version on the last deal, works really well. Linked it with Alexa. I also upgraded the garage door reed switch to a proper metal reed switch specific to roller doors and just adapted the cable to the meross via cutting and joining the cable. Works perfectly. The plastic reed that comes with it on works correctly in a specific orientation.

  • Key-Tourist on 25/04/2022 - 10:51

    Wondering if someone could help me understand if I need the one with HomeKit or without. We use Google smart devices in the house but have only iPhones. Thanks

    • akstatic on 25/04/2022 - 13:05
      +1

      HomeKit version needs apple home hub devices such as iPad, apple tv or apple speaker for it to work with apple's home app, if you want to use meross' own app, you wouldn't worry about HomeKit version. If you have iWatch and you want the garage door to open remotely with Siri command, then either you have to be either on the same wifi as the meross garage door opener or you need apple hub devices connected on the same wifi.

      Essentially without hub, you can only use it via meross app. if your iphone is locked and you want to open the garage door opener with Siri commands on your data connection it won't work.

  • usmanhafeez2000 on 25/04/2022 - 11:11

    I want to know that too. Have Google Nest Hubs at home and use iPhones mobiles. Which one should I buy?

    • akstatic on 25/04/2022 - 13:06

      HomeKit version needs apple home hub devices such as iPad, apple tv or apple speaker for it to work with apple's home app, if you want to use meross' own app, you wouldn't worry about HomeKit version. If you have iWatch and you want the garage door to open remotely with Siri command, then either you have to be either on the same wifi as the meross garage door opener or you need apple hub devices connected on the same wifi.

      Essentially without hub, you can only use it via meross app. if your iphone is locked and you want to open the garage door opener with Siri commands on your data connection it won't work.

      • usmanhafeez2000 on 25/04/2022 - 13:11

        Thanks for the detailed explanation mate. Will homekit version work with Google Nest Home and Speakers?

      • DoctorCalculon on 25/04/2022 - 14:29

        iPad

        Does HomeKit setup using an iPad require that it be connected to power at all times (which isn't really going to be great for the battery)?

        • akstatic on 25/04/2022 - 14:39

          I use my iPad quite often, so it is almost always charged. Note almost, there is been few times when iPad was discharged and disconnected from WiFi and I couldn't open the door using watch, I had to fallback to Meross app

  • WhiteEvo6 on 25/04/2022 - 11:34

    Can this be configured to work with Google nest hubs and Apple gear so either assistant can open it?

    • akstatic on 25/04/2022 - 13:06
      +1

      Yes. It works on both of them. As long as you have apple home hub.

  • Mahakaal on 25/04/2022 - 12:56

    Hi guys could you please let me know is it work for DOORWORKS GDC6

  • Bash87 on 25/04/2022 - 14:12

    I have a B&D SDO-3V2 WE CAD S roller door, anyone have the same door can share a picture of how they installed this kit?
    Bought this product just want to make sure I do the installation correctly.
    Thank you

    • username1 on 25/04/2022 - 15:36
      +1

      It looks like it has the right connections. Meross has a search to find the right connections to wire the device to.

      Just make sure you only put the wires in the slot exactly labelled as per the diagram.

      When I installed mine, I unscrewed the back plate and found a set of wire slots which I thought was it. Luckily I opened the front cover (where the buttons/controls are located) and saw the actual connection points which matched the instructions exactly.

    • Lockthechamp on 25/04/2022 - 21:28
      +1

      Neither manual is very helpful. I think my motor is the same so look for 6 terminals on the bottom left side of the back panel. Use AUX/OSC for the blue wire. And brown wire to the 0V terminal. The pegs push back the insert the wire, and release the pegs again to hold the wire. That’s it. Then just follow the guide to connect pair to wifi.

  • kiwibro on 25/04/2022 - 21:16

    I just brought one of these …ordered Friday morning got it less than 24 hours later. Jumped on Youtube for a quicklook at an installation video…too easy sweet as had it all set up and going in about 40 mins…its works really well i'm so stoked with this as I used to always forget if I closed my door or not…..now I'm getting one to set up on my gate as i saw a few people saying they did the same
    get one of these devices they are worth every cent

  • Andyz on 26/04/2022 - 11:45

    Bought on these on the last deal, can't believe how easy it was to install.
    Awesome product.

  • ocular on 29/04/2022 - 14:27

    Bought this for B&D CAD4. Easy to install. Firmware update done. Can open and close with app. When close with app get a message "door action failed " at about 8 secs. But when finished closing at about 11sec app notifies " Garage door has closed". No problems with opening. Any idea if this can be fixed?

  • ocular on 29/04/2022 - 15:14

    Sounds as though my garage door is a slow closer and takes longer than the default, hence the message. Explained here https://www.meross.com/mTerminal/support/FAQ/210.html
    But where do I find device settings? Can find the device icon on home screen of app but this opens and closes. Still looking for device settings. Me and the garage door are both slow.

  • ocular on 29/04/2022 - 19:01

    Smart Garage Door … Is written across icon, clicking on … Opens up device settings and set opening time to 20s and error gone.

  • cvas on 30/04/2022 - 10:58

    Anyone know if you Can you get Home assistant and Life360 to collaborate to open the door automatically when you get home?

Login or Join to leave a comment
Login Join