• out of stock

6x Ovonic 1550mAh 4S 14.8V LiPo Batteries $114.99 Delivered @ Ovonicshop

110

These Batteries are the bomb. Charges up to 4.35v per cell. I've had these packs for over 2 years and have absolutely abused them, still kicking it. Just over $19 each in the 6 pack option. Shipped from Melbourne.

Special note: This item supports charging to 4.35 V, so you can get more capacity and fly time (only for 1550mah 4s 100c)
Spec of ovonic 1550mah 4s:

  • Brand : Ovonic

  • Chemistry : Li-polymer

  • Length(dev.5mm) : 73mm

  • Width(dev.2mm) : 35mm

  • Height(dev.2mm) : 38mm

  • Capacity : 1550mAh

  • Voltage : 14.8V

  • Cell Number : 4S1P

  • Discharge Rate : 100C

  • Max Burst Discharge Rate : 200C

  • Net Weight(dev.20g) : 187g

  • Connector Type :XT60 Plug

  • Balance Connector Type : JST-XH

Related Stores

Ovonic
Ovonic

closed Comments

  • +1

    OP you might be on a list now /s

  • you can get more capacity and fly time

    is this for drone or something ?

    • +1

      Marketed for FPV drones, yes

  • Does it explode?

    • Depends on your grip and stroke….

  • Will these fit RC Cars ?

    Specifically the Wltoys 12427 4WD Crawler RC Car and Eachine EC30B RTR 1/14 2.4G 4WD Brushless RC Car both which were quite popular here on OzBargain.

    They did come with 1500mah li-ion batteries but wanting to upgrade to li-po for safety reasons ?

    I do have a ToolkitRC M7AC which should charge these batteries no problem..

    thanks in advance.

    • These toys use 2s configuration (7.4v) so no unless you know how to split and rewire them

    • LiIon is significantly "safer" than LiPo.

  • Max you should do on your WLtoys is a 2S unless you have a brushless setup.

    • thank you!

      im new to RC car biz, appreciate ur input.

  • +1

    This is the crack of race drone pilots.

    my 1400mAh 4s are still going strong, I dont need more.

    Now if they were 5s…. (Im not a 6s fan; too many "fake" voltage regulators out there that can pop mid flight with spikes).

  • Darn, wish I could fit this on my mobula 7

Login or Join to leave a comment