Bambu Lab P1S Combo, P1S 3D Printer and AMS $1214 Delivered (after $85 off Welcome Voucher) & More @ Bambu Lab

140

Go to Deal

bleugh on 15/05/2025 - 11:11 au.store.bambulab.com (573 clicks)
Last edited 15/05/2025 - 12:22 by 1 other user

Quite literally the DAY AFTER my P1S arrived (well, after I picked it up from Phazer FPV)….Bambu labs have a 'welcome' email sign up to get $85 off any printer!

Go to the Bambu website and you should get the popup.
if you don't , sign out and try again.
if still not, try another browser / incognito mode,
type in an email that you've not used before, the code will come up / be emailed to you!

This brings the price of a P1S combo down to $1214
Brings the A1 Combo price down to a BARGAIN $699 Delivered!

Now's the time!!

Related Stores

Bambu Lab

• 

  umyeahokay on 15/05/2025 - 11:16

  +1

  Don'tcha hate that?

  Hopefully they'll bring down the price of the AMS v1 now the V2 is available.

  • 

    bleugh on 15/05/2025 - 11:47

    +1

    it's a hard one for sure…
    The combo is $200 more, but is it really worth $200 for the internal heater?

    Googling about shows you can bodge a heater / dryer in to the AMS1 yourself for quite cheap!

  • 

    ilikeverycheapstuff on 15/05/2025 - 14:02

    +1

    even if the v2 is more expensive, i thought the v2 was more worthwhile since the upgrades were what the v1 were lacking? i.e. the filament guides, filament dryer etc

    Looking to be corrected if wrong because I want an AMS and v1 is still more affordable (relatively).

    • 

      bleugh on 15/05/2025 - 14:25

      +1

      You're totally correct,
      BUT…
      at the end of the day, it's a $220 premium to get the AMS2 in a P1S combo….

      Figured I'd just go AMS1, let the market figure out any bugs / issues with the AMS2, then buy an AMS2 at some point in the future if I really need an extra one

• 

  willthefomo on 15/05/2025 - 11:17

  +1

  Got the voucher, does not work for A1 mini. Works for A1. Still a good deal. Upvoted

  • 

    3dprintdeals on 15/05/2025 - 12:29

    it's only for A1, P1P & P1S as per their landing page.

    $85 off the A1 Mini would be a crazy deal

• 

  bob98 on 15/05/2025 - 11:18

  +1

  Glad it doesnt work on h2d only put my order through on monday

• 

  amoretpax199 on 15/05/2025 - 11:39

  +2

  Thanks! I guess I will get a 3d printer and start this hobby! I will be printing a lot of RuneScape things.

• 

  bleugh on 15/05/2025 - 11:55

  Also these ones…….

  A1 $414,
  P1P $664,
  P1S $814 + Delivery (typcailly about $50)

• 

  3dprintdeals on 15/05/2025 - 12:26

  +3

  Pricing table excluding shipping.

  Model	RRP	With Code (-$85)
  A1	$639	$554
  A1 w/ AMS Lite	$749	$664
  P1P	$749	$664
  P1S	$899	$814
  P1S w/ AMS	$1,249	$1,164

  nice pricing, but there has been an influx of models come out that are very competitive.

  Elegoo Centauri & Centauri Carbon - P1S copy, no AMS yet.
  Anycubic Kobra S1 Combo

  • 

    bleugh on 15/05/2025 - 12:47

    That's awesome, thanks for this

• 

  3dprintdeals on 15/05/2025 - 12:28

  +3

  If you need to buy filament for your new printer, pick up some Jayo/Sunlu from this deal

  • 

    umyeahokay on 15/05/2025 - 13:35

    Got 20 rolls of Jayo from that deal, good savings. My go-to is usually Siddament but this was great for stocking up.

• 

  Jaspa7 on 15/05/2025 - 13:02

  +1

  they're good printers - but have definitely left a sour taste with all their firmware shenanigans at the start of the year, so will steer clear

  • 

    3dprintdeals on 15/05/2025 - 13:08

    +1

    It was overhyped I feel, stick to LAN mode if you want it offline

    • 

      Jaspa7 on 15/05/2025 - 13:11

      +1

      maybe… but just principle/precedent/vibe was off.. all of your prints going to the mothership without really informing you, locking you in to updates that locks you deeper into their ecosystem etc.. who knows what was coming next.

      if it weren't for people grabbing torches & pitchforks, there wouldn't even be a LAN mode

      • 

        mickeyjuiceman on 15/05/2025 - 17:04

        Ah yes, no informing of people at all, nobody knows about it

    • 

      Hornpub on 15/05/2025 - 18:34

      what do i lose if i use LAN mode?

  • 

    bob98 on 15/05/2025 - 15:22

    +1

    I just made the move over to bambu studio today. i was really vocal about it to start with but it was all blown out of proportion and i do see the need for there own firmware to be locked seeing they sell a laser combo now.

• 

  3dprintdeals on 15/05/2025 - 13:57

  if you're interested in a Bambu/3d printer, more discussion on this deal

• 

  Hornpub on 15/05/2025 - 18:34

  +3

  wtf same price……elagoo is doing better at the moment ithink.
  TBH, i feel like dual head is the way to go, at least for med to high tier printers. So i would only buy A1 series if you do need 1, and wait for something good like X2C or whatever with 2 heads.

  • 

    bleugh on 16/05/2025 - 07:05

    yeah, dual hot end really looks like the future!,
    I'd love to have a H2D closer to retirement though as that really does look like a 'business' machine…

    still, happy with my Resin Saturn 4 Ultra and this P1S now, will grow things orgainically and see what happens

    • 

      Hornpub on 16/05/2025 - 20:23

      i feel like in a commercial setting, you want one machine only do one job. H2D is like for pro-sumer but with tight space…….doesnt make sense to me….

      yeah the P1S ages like fine wine..

  • 

    mickeyjuiceman on 16/05/2025 - 10:44

    OK, this isn't a "med to high tier printer" - it might be a medium, but that's about it, so a completely invalid comparison. People buying this are (almost certainly) not buying a dual-extruder printer at the price point it will exist at. They're not even buying an H2D.

    • 

      Hornpub on 16/05/2025 - 20:25

      yeah true, especially nowadays printers can cost $$$ easily. but i was referring to new comers who thinks dropping 1 grand on your first machine, they would expect "high tier" out comes. i guess the P1S is just a very nice machine, but basic.