Rick351 » user profile

Member Since 23/01/2020
Last Seen 26/02/2021
Location Sydney

Recent Activities

There is a leak on the fuel rail that can barely be seen by the naked eye(literally) suprisingly... had trouble removing one of the…
29/11/2020 - 09:34
Brand new. Old and new pipe looks identical. No damage that i could see....
12/11/2020 - 20:30
Just replaced the pipe... same problem. What am i supposed to do? I've installed a few split systems(i'm a sparkie) and usually you whack…
12/11/2020 - 19:29
Toyota Hiace 3.0L diesel 2008
07/11/2020 - 15:45
Yeah just went to a wrecker in springvale, they don't have it. Where can i buy a new pipe? Online? Thanks
07/11/2020 - 10:04
I did pull that pipe up when i had that photo taken. It looked normal the way it was sitting on the thread. I'm gonna go to a wrecker and…
07/11/2020 - 08:37
There is no o-ring/washer. Here is a photo i have just taken. Do i need to add a sealant on the thread? https://ibb.co/jwGRkHn
06/11/2020 - 20:18
oscargamer my friend that was very helpful give yourself a pat on the back.
06/11/2020 - 19:40
Hey y'all, So the other day had fuel leaking out my car and i noticed that there the fuel was leaking from the fuel injector(not sure…
06/11/2020 - 18:19
I have a crazy/junkie neighbour. Basically i need a 2 x camera system. Preferably wired, as I've heard it's a lot safer. I've had a look at…
30/03/2020 - 21:04
I'm not getting enough air flow when i turn the cooler on max, had a look at the unit on the roof, doesn't spin quick. Should i lubricate…
27/02/2020 - 15:18
Was thinking of just closing the vents inside the house. Magic haha
21/02/2020 - 09:06
Yeah that's what I'm going to do, just trying to see if the ozbargain community can brainstorm any other ideas. Motorised damper going for…
20/02/2020 - 18:47
I'm an electrical apprentice, would like to try and diagnose the problem myself.
20/02/2020 - 18:45
I've had a Brivis Evap cooler for 15yrs. The Damper in the unit doesn't flip open and makes a humming sound. I put two screws to…
20/02/2020 - 17:58
Yes that RACV guy didn't bother to show me anything, I mean all he said was it could either be the main fuse link or the cable going to…
08/02/2020 - 16:10
I'm back, i had someone from RACV come in, they ran a cable(don't know what it's called, just a metal strand) going from the positive…
08/02/2020 - 15:08
Okay, in order to work that part out should i remove the fuse link and have a look inside?
06/02/2020 - 17:23
Okay so i had a look and the first thing the cable goes to from the battery is to the main fuse…
06/02/2020 - 14:20
I'll suss that out tomorrow, what is the first thing the cable goes back to from the fuse link? Hard to see where the cables are going. Do…
03/02/2020 - 20:38
Tested that all good.
03/02/2020 - 20:36
Yes i tried it with the ignition on and off. Yes it was on volts DC and i tried that to different earthing points. No reading
03/02/2020 - 16:27
Thanks. I have just done that and did not get a reading.
03/02/2020 - 16:13
The red probe going to the nut on the fuse link and the black probe to what green area? Sorry not sure if you're talking about the green…
03/02/2020 - 16:05
What should i do next?
03/02/2020 - 15:52
I got the same reading on all of the bolts. Black lead is negative right?
03/02/2020 - 15:52
https://files.ozbargain.com.au/upload/336976/76834/20200203_145121.jpg Car has been sitting in the driveway a while.... anyways, i got a…
03/02/2020 - 15:28
I will google/youtube it on how to test it properly. But how do i have power going to all the other not so important fuses if the power…
24/01/2020 - 12:49
I understand the main power fuse covers power to all components. Could you send me a link to test it correctly? I went from - of the…
24/01/2020 - 11:54
I'll check that however I wouldn't be able to get readings from the smaller fuses if the main fuse had blown right? The fusible link that i…
24/01/2020 - 11:28
Loading...