If you missed out on the Logitech Lapdesk deal and want to get some OzBargain feeling..
From their FB again.
OK - Got another special for you because the other one sold out so quick: A Philips 42" Wall Mount for $9.95 Delivered. Normally retailing on our site for $34.95, use this coupon code in the shopping cart - "WALLMOUNT" to receive your $25.00 discount! This is gonna fly - Limit one per customer!
That's the spirit lol
Fantastic, it works, thank you very much!
come on, I don't need this, why the deal exists???!!!
To make you $9.95 poorer, duh!
I don't have a laptop but bought a lap desk. I don't have a TV, should I buy a mount?
Same question here
Of course you should! It's cheap. Buy two.
you cant buy two with one account, because COTD only allow you to use the coupon once.
but you can always register another account with a different email…
STOP IT! NO MORE!
Don't need this yet too, but thinking ahead, it might be useful in case my mother decides to replace the old CRT, analogue TV in her room (no more channels due to digital only in Perth now). Now, to get her to buy a new 32" TV…
Does anyone know if these wall mounts will work with most 32" screen brands, or just Philips?
VESA wall mount compatible: 200 x 100 mm, 200
x 200 mm, 200 x 300 mm, 300 x 300 mm, 400 x
300 mm
Should fit most TV's
Thanks! Also would be great if people posted any specials on 32" TV's they've noticed :)
maybe a $9.95 32" lcd @COTD using code HOTLCD
32-42", but weight limit is 50kg … I assume they're trying to be safe and not say it's compatible with 55" LED TVs (~25kg) just in case someone tries to hang a 55" plasma?
Sold! I mean bought! Just couldn't resist the price.
Tilt? Perfect for the boat or caravan :)
Or for DIY-ers who don't own a spirit level???
I guess that's why it is selling for $10, so no point complaining about the useless function. Bought!
This is way more useful than the "lapdesk".
Are these safe to mount on a chipbloc/plaster wall?
Sure, so lomg as you don't hang a TV on it.
How about screwing it into the wall studs?
i dont know how to locate the studs
i live in an apartment also
it'd be a good idea to ask a friend who does. You don't want your expensive TV dropping to the ground, or fill your wall with holes because you keep missing the studs!
I can laugh at this because I live in WA, where we build our houses with brick walls.
Why is that? Too many termites?
Brick houses don't stop/deter termites.
@maniac
I can laugh at this because i live with Civilisation
unfortunately housing affordablity isnt that great, resulting in apartment living and cheap materials used for walls
Thank you! I haven't actually use CotD before. Does anyone know how long shipping is on average?
Normally 5-6 days in my cases
Thanks mate :)
…must…resist…buying…
resistance… is… futile…
I can't find any option to use this coupon code in the shopping cart , if possible, please advice?
Me neither
Its probably at the checkout
There's a "Have a coupon code?" in small writing in between the total and the sub total.
It's on the cart page before you click to go to the checkout.
Thanks!
Great price, had to get one.
I hate that this is cheap enough for me to just buy and wait til I need it.
Price is back at $34.95 with delivery…
Multiple :(
Just bought 1 for $9.95 delivered
I can't see how, I've tried different browsers but getting $34.95 on the product screen, cart and checkout.
You need to use the coupon code WALLMOUNT during checkout.
First log in. Then click add coupon code. Then add WALLMOUNT and it will adjust the price to 9.95!
it's limited to x1 per person so if u buy multiple it'll charge u non-discounted rates
I should learn to read, sorry and thanks :)
Gotta…press..cancel order..must.. resist temptation.
…bought!
NOOOOOOOOOOOOOOOOOOOOOOOOOO
Thanks OP, just bought one even though I don't think I'll ever use it because I don't need a TV :)
Nice one. Just ordered. Thanks OP.
works.thanks
After a cup of hot coffee i am able to resist this temptation!! I'm proud of myself!
Hope you got a bargain on your cup of coffee.
During my cup with a cookie, I clicked buy.
nice to see the RRP $79.99, I am proud.
http://www.amazon.com/Philips-SQM6435-27-Tilting-42-Inch/dp/…
Argh! Now I need another cup of coffee!! MUST… RESIST…!!
Bought.
very nice!!! i was after one of these… now to find an installer to do the job… anyone have any suggestions for Melbourne?
Go to your bathroom and look in the mirror.
He might not know much, but he is cheap and can read the 2-page installation manual.
dont you need to install on a piller etc etc so the TV doesn't fall off the wall??
if you are in western suburb area or close to (vic), call pointcookhandyman , he is great!
thanks mate!
Bought!!
It's easy to install, make sure you find at least one stud, the other side (if you can't find a stud, and I mean WALL STUD), then use a buetterfly screw made for plaster board, Bunnings has them, a few dollars each.)
EDIT:The way I see it, you must secure the curve bar onto a stud, normally studs are located 33cms (something like that apart) so with a bit of luck you can secure both ends of that curved metal onto the wall studs. good luck!
EDIT2: another tip, if you want to hide the cables the cables in the wall, make sure you don't mount it higher than 1.2 meters from the ground, plaster sheets are 1.2 meters tall when they are installed, so at the 1.2 meter mark there will be a Noggin (short stud that goes horizontal from one vertical stud to another), it will be wise to mount slightly below this noggin so cables can freely drop down to the floor (behind the wall). at the floor level drill a 2inch hole and use a coat hanger to fish out the cables. any more help / clarification let me know.
Jimmy- I think that anything going into the plasterboard usually has a capacity of 5-8 kg. probably ok on one side if the tv itself is 15kg or so. The firm fix takes half the load.
I have seen guys take off a piece of the plasterboard and replace with ply (to studs) then fix the mount to the ply.
Spacing between vertical studs usually 60cm.
Didn't need it. Now bought it.
Argh, OK, I got one :) Is there any reason why it wouldn't hold a 51 inch TV that's about 25 kgs?
It will hold. Phillips pdf specifies up to 50kg.
So 25kg will be piece of cake.
i was thinking the same.. i have a 32' for the bedroom so this will be fine for it.
however a 50' for the living room and i'm wondering why the specs quote a 32' to 42' and not beyond that
As someone mentioned earlier, its to stop people hanging a 60kg 50inch plasma on it.
Can anyone give an example of the swivel feature being useful?
The Philips site mentions the tiling adjustment is to make it easier to level.
Nothing worse than measuring, drilling and hanging only to realise its slightly tilted.
Thanks, ordered not sure for what!!!!
Don't need one but bought anyways. Sometimes I wonder if ozbargain actually saves me money or makes me spend more on useless things haha
…only reason I bought becos it felt SO good post entering the COUPON……No idea what I gonna do with it…..:)
For $10… had to give in and buy one. Looks decent quality, not like the usual yumcha
Bought one not sure why, anyone manages to mount a 55" LED on it, please give a review.
Tip for mounting, use that filla foam, spray in the hole and then insert wall plug (brick wall) for that extra security, useful when you have hollow core bricks. Could also use for stud wall as a reinforcing medium when you do not have a stud to fix to, remember to clean it up as it expands and escapes from the hole.
Bought one. But this type of wall mount doesnt look like I can slide the tv left/right across the bracket? So the TV position is limited to where the studs are located behind my wall correct?
sold out
wow, best experience i've ever had on cotd. already got mine
Same received mine as well.
Received and packaged well.
Received. Now I need another TV.
Do i need this too … ARGH !!
Just bought one … BOOM !!