Kogan Premium DC Motor Pedestal Fan - $89 + Postage @ Kogan (Free Delivery Via Shipster)

Related Stores

Kogan

Marketplace

• 1
• 2

• • 

    videoman on 06/02/2018 - 17:29

    When you get the fan can you please confirm if it works with the Mi Universal IR controller? Thanks

    • 

      supersabroso on 06/02/2018 - 22:32

      Yeah, I'll let you know. In my experience, only air conditioners have their own special multi codes. They are adding a lot of remotes to deal with that anyway.

      • 

        HL2 on 15/02/2018 - 09:45

        It works with mi remote. Go to fan, search for midea. It syncs!

      • 

        jobski on 19/02/2018 - 16:39

        @HL2:

        When you said it syncs, does it mean the xiaomi remote is able to know the current state of the fan through IR?

• 

  [Deactivated] on 06/02/2018 - 11:46

  Note these automatically cut out after 12 hours, which can't be adjusted.

  That means no good for constant efficient air exhaust, which is what i had in mind for one…

  • 

    HL2 on 15/02/2018 - 09:46

    Mine works 24/7. 12 hours limitation is only when you set timer

    • 

      [Deactivated] on 15/02/2018 - 09:52

      Mine doesn't, consistent with Page 4 of the manual which says:

      Automatic Shutdown
      After 12 hours of running uninterrupted, the fan will automatically turn off

      No mention of timers there…

      Are you sure we're talking about the same fan?

• 

  [Deactivated] on 06/02/2018 - 12:02

  Does anyone have any experience with the "non-premium" Kogan DC Motor Pedestal Fan? (currently out of stock).

  I'm interested in whether the fan strength is equivalent to the OP's, and whether it will also automatically cut out after 12 hours (the manual doesn't say anything about this, but it does have a count-down timer up to 7.5 hours according to the manual).

• 

  brisneylander on 08/02/2018 - 18:09

  For those that have this fan. I'd appreciate if anyone can assist me with a question

  Mine arrived today and I have unpacked it. You have to attach the bottom "tube" to the base, using the 3 butterfly screws. Mine seems there is part missing. the bottom of the tube is hollow. It sits on the base fine, but there is nothing to screw into. Put the butterfly screw up though the base, as the "tube" has no base, so they are just screwing into nothing.

  Am i missing something, either a part, or a concept? I just cant see how you could possibly ATTACH the tube to be base with the parts i have.

  Thanks

  • 

    jackofspade on 08/02/2018 - 19:11

    LOL mine arrived today as well and I have the exact same problem. The butterfly screws are incorrect size and the holes of the base and the tube don't even align. Contacted Kogan and they want me to ship the whole thing back to them.

    • 

      brisneylander on 08/02/2018 - 19:29

      That bites. I'm in process of raising a support log with them.

      If they tell me to pack and ship the lot back i'm going to be very displeased.

      • 

        jackofspade on 08/02/2018 - 19:59

        That's the only option. They don't have any spare parts.

      • 

        brisneylander on 08/02/2018 - 20:15

        +1

        @jackofspade:

        How did they say to do it. My expectation would be that they send courier to me. No expense or further inconvenience for me and I have no time to haul that big box to a post office

      • 

        jackofspade on 08/02/2018 - 20:33

        @brisneylander:
        I think they will send me a PrePaid AusPost Label.

• 

  nagel on 13/02/2018 - 01:15

  Is there any way to tighten up the tilt up/down pivot? Mine keeps falling down…

  • 

    nagel on 13/02/2018 - 01:29

    +2

    Just fixed it. Undo the two small screws just under the motor and lift it up. Then tighten up the bolt/nut in there. Just a little bit not too hard or it wont pivot at all :)

• 

  adr8 on 19/02/2018 - 14:15

  +1

  Free shipping on these which ends tomorrow, purchased two for $108 using $70 worth of Kogan vouchers :)

  • 

    headphonejack on 19/02/2018 - 14:18

    +1

    You don't already have Shipster?

    • 

      adr8 on 19/02/2018 - 14:26

      +1

      Was going to sign up to purchase these but didn't need to today. Will join later when I need to purchase something else, hopefully they don't end the free trial anytime soon.

• 1
• 2