• expired

Aavara Triple LCD Monitor Stand $34.50. Was $258 at Officeworks in Store Only

540

Appears to be instore only. This was at new Altona North VIC store. Possibly nationwide.

Full details:
http://www.aavara.com/en/products/product.php?id=43

Related Stores

Officeworks
Officeworks

closed Comments

  • Jaycar have some awesome mounts for fairly cheap too. I have used 6 at work.

    • +4

      You have 18 screens at work? Must be a traffic controller

  • damn looks awesome…will check it out tonight but i doubt they have any stock near me (sydney)…. :(

  • +1

    discount price is great

    RRP is ridiculous

  • +1

    Start your engines!

  • I've got a 2-monitor stand from the same brand, very sturdy but a pain in the ass to adjust without taking it all apart (though that's probably a good thing, means it's pretty steady the rest of the time)
    For that price you can't go wrong if you've got three monitors to mount

    • The 2 monitor stand was also discounted. I think it was about $50. Not as good as this deal.

      • Must be a local deal. Can't find any reference the 3 monitor stand on the site and the 2 monitor one was at full price.

      • The 2-monitor stand at my local was discounted to $75 and no stock of the triple. Disappointed.

  • how many were left?

  • Can you angle/bend in the outside monitors? Or is this just 3 side by side in a straight line? (not useful for a corner desk if so!)

    • -2

      you can bend them inwards

      • +1

        you can bend them inwards

        NO, you cannot.

        Well, you can twist them in a bit, but then the middle screen will be sticking forward

        This stand does not allow you to create a "wrap around" effect. The centre rear point (VESA Mounting) of all three screens is basically in a fixed and straight plane.

        _ _ _ and not \ _ /

  • +2

    Only suits up to 24in monitors and 12kg per monitor as per the specs.
    Also has 20deg tilt and swivel

    • Thanks for the heads up, almost ran out to see if there was one at my local but one of my screens is 27 inch :(

  • 6 in VIC - Chadstone & Altona apparently.
    Nothing close, bummer :(

  • Can anyone find the link for office works online, I can only find the 2 monitor stand for $75

  • This is the knockoff of the original proluma. From memory they are exactly identical. Not sure if Proluma needed to sue Aavara's backside off.

  • Thanks just picked up the last one from there. Good that i asked them to put it aside for me

  • None in Browns Plains QLD, 2 x in Underwood QLD (possibly gone, some ozbargainer was on the phone to them at the same time I as), 3 x Hervey Bay QLD.

    I was about to go buy one but then realized that both my monitors were 27inchs…

    • They would easily fit since there would be no monitor in the middle

    • confirmed Underwood is out of them

  • I had the 2 monitor version of these - lasted five years before I sold it on Gumtree. Quite a good stand, not very stylish by today's standards but for $30 it's amazing value.

    • +5

      So the value is "Inconceivable!"?

  • Called Chadstone VIC store and they have run out of them. Don't waste your time going there anymore.

  • +2

    No stock in Virginia, Aspley and Windsor QLD.

  • +1

    First I have to get rid of my BenQ monitor before I can get 3 new ones. XD

  • +1

    Anyone tried or thoughts on 2x 27" LCD's on the two outer clips?

    • Would also like to know.

  • Can anyone help me get it and ship to Perth? </3
    Pwease.

  • Did Russell Peters price this item? Only 34.50!

  • anyone seen one at any of the adelaide stores?

  • For anyone in QLD, the only stores at the moment that have any left are Nerang with 1 and Hervey Bay with 3.

  • There are cheap (sub $20) VESA swivel mounts that can bought on eBay and easily adapted to fit between your outside screens and the mounts on this stand so that you get wrap around.

  • I picked up one of the dual monitor brackets from Carnegie, VIC yesterday. Only one of my monitors has VESA mounts on the back so I disassembled the other today, and used a holesaw and drill to fit the backing plate into the monitor. Need to grab a few nuts tomorrow, but looks like I'll be set for a full install in the coming days. Thanks OP.

    • Really? I went to Ferntree gully and the employee kindly looked on his little device and advised me there was only 1 more left in Victoria, which was at the south melbourne store. When I rung them up they told me they couldn't even find it on the system even though I gave them the product code, he then said he went and had a look for it and couldn't find it…

      • There were about six at Carnegie at about 11am on Saturday. They were all the dual mount, not the triple.

Login or Join to leave a comment